STARCHES Characterization, Properties, and Applications
STARCHES Characterization, Properties, and Applications
Edited by
Andréa C. Bertolini
Boca Raton London New York
CRC Press is an imprint of the Taylor & Francis Group, an informa business
CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 © 2010 by Taylor and Francis Group, LLC CRC Press is an imprint of Taylor & Francis Group, an Informa business No claim to original U.S. Government works Printed in the United States of America on acid-free paper 10 9 8 7 6 5 4 3 2 1 International Standard Book Number: 978-1-4200-8023-0 (Hardback) This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future reprint. Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copyright. com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that provides licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe. Library of Congress Cataloging‑in‑Publication Data Starches : characterization, properties, and applications / editor, Andréa C. Bertolini. p. ; cm. Includes bibliographical references and index. ISBN 978-1-4200-8023-0 (hardcover : alk. paper) 1. Starch. I. Bertolini, Andréa C. (Andréa Curiacos) [DNLM: 1. Starch. QU 83 S795 2010] TP248.S7S753 2010 660.6’3--dc22 Visit the Taylor & Francis Web site at http://www.taylorandfrancis.com and the CRC Press Web site at http://www.crcpress.com
2009040938
Contents Preface................................................................................................................ vii About the Editor.................................................................................................ix Contributors........................................................................................................xi Chapter 1 Trends in starch applications.................................................... 1 Andréa C. Bertolini Chapter 2 Characterization of starch granules: An atomic force microscopy approach................................................................ 21 Renata Antoun Simão and Beatriz Rosana Cordenunsi Chapter 3 Starch macromolecular structure........................................... 33 Luis Arturo Bello-Perez, Sandra Leticia Rodriguez-Ambriz, Mirna Maria Sanchez-Rivera, and Edith Agama-Acevedo Chapter 4 Solid-state NMR applied to starch evaluation.................... 59 Maria Inês Bruno Tavares Chapter 5 Thermal transitions of starches.............................................. 71 Paul Colonna and Alain Buleon Chapter 6 Starch-based plastics............................................................... 103 Rossana Mara da Silva Moreira Thiré Chapter 7 Trends in microbial amylases............................................... 129 Marcia Nitschke Chapter 8 Modified starch: Chemistry and properties....................... 145 Kerry C. Huber and James N. BeMiller Chapter 9 Starch-based nanocomposites............................................... 205 Eliton S. Medeiros, Alain Dufresne, and William J. Orts v
vi
Contents
Chapter 10 Biodegradation of starch blends........................................... 253 Derval dos Santos Rosa and Cristina das Graças Fassina Guedes Index................................................................................................................. 271
Preface Recent advances have been made in studies of the characterization, uses, and applications of starches. In past years, several modified starches and their derivatives have been used as new food ingredients. However, innovations have proposed the use of starch and new starch-based materials in products others than those manufactured by the food, pharmaceutical, and paper industries. As a consequence, changes in world starch production and diversification in sources of starch have been observed. Also, there has been a considerable impact on research about starch and the techniques proposed for starch characterization, both at the granular and macromolecular levels. The aim of this book is to contribute a modern overview of trends and advances in the production and applications of starches, with emphasis on some recent techniques used in starch characterization as well as some aspects of production, properties, and biodegradation of starch-based products. This book discusses starch characterization, modified starches, starch-based plastics and nanocomposites, and biodegradation of starch blends. It is a comprehensive reference book for researchers, teachers, and other professionals who are interested in recent advances in starch and starch-based products. The book also may be suitable as a reference or textbook for graduate courses on starches and biopolymers. An outstanding team of collaborators with complementary expertise from several research areas contributed to this book. This has resulted in an updated overview with an innovative and multidisciplinary approach to trends in production, characterization, properties, and applications of starch. There are ten chapters covering trends in starch production and applications, advances in starch characterization utilizing several techniques, the main new starch-based products, and starch biodegradability. A general discussion is provided about trends in starch production and the application of starch in the food, textile, pharmaceutical, chemical, agricultural, and plastic industries as substitutes for synthetic polymers (Chapter 1). This book also covers recent advances in starch characterization using several techniques such as atomic force microscopy (Chapter 2), high-performance size-exclusion chromatography and sedimentation vii
viii
Preface
field flow fractionation (Chapter 3), nuclear magnetic resonance (Chapter 4), and starch thermal transitions (Chapter 5), providing an overview of starch characterization at the granular, macromolecular, and rheological levels. The main industrial concerns about starch applications, such as amylase production employed in starch hydrolysis (Chapter 7) and main modified starches (Chapter 8), are also discussed in this book. Properties and applications of new starch-based products, including starch-based plastics (Chapter 6) and starch-based nanocomposites (Chapter 9), are discussed with emphasis on starch properties, as well as the biodegradability of starch-based blends (Chapter 10). I would like to acknowledge all of the collaborators for their important contributions and the expertise devoted to this book. Finally, I would also like to thank everyone who contributed, directly or indirectly, to this work. Andréa C. Bertolini
About the Editor Andréa Curiacos Bertolini is involved in scientific research on starch and biopolymers. She has a PhD in food science from the Université de Nantes in France, where she worked with a concentration on starch chemistry at the Institute Nationale de Recherche Agronomique (INRA) in partnership with the Centre de Coopération Internationale en Recherche Agronomique pour le Développement (CIRAD). As an invited researcher, she worked at the Fonterra Research Centre in New Zealand and at the University of Idaho in the United States on modified starches and starch rheology. At present she is a food scientist at the Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA–Brazilian Agricultural Research Corporation, Brazil). Her interests include biopolymers with an emphasis on starch characterization, modified starches, and starch as an ingredient in food and nonfood products.
ix
Contributors Edith Agama-Acevedo Centro de Desarrollo de Productos Bióticos del IPN Yautepec, Morelos, México Luis Arturo Bello-Perez Centro de Desarrollo de Productos Bióticos del IPN Yautepec, Morelos, México James N. BeMiller Whistler Center for CarbohydrateResearch Purdue University West Lafayette, Indiana, USA
Beatriz Rosana Cordenunsi Faculdade de Ciências Farmacêuticas Universidade de São Paulo São Paulo, Brazil Alain Dufresne Institut National Polytechnique Ecole Française de papeterie et des Industries Graphiques Grenoble, France Cristina das Graças FassinaGuedes Universidade São Francisco Itatiba, Brazil
Andréa C. Bertolini EMBRAPA Agroindústria de Alimentos Rio de Janeiro, Brazil
Kerry C. Huber School of Food Science University of Idaho Moscow, Idaho, USA
Alain Buleon Institut National de la RechercheAgronomique Nantes, France
Eliton S. Medeiros EMBRAPA InstrumentaçãoAgropecuária São Carlos, Brazil
Paul Colonna Institut National de la RechercheAgronomique Nantes, France
Marcia Nitschke Instituto de Química Universidade de São Paulo São Carlos, Brazil xi
xii
Contributors
William J. Orts Bioproduct Chemistry and Engineering Unit U.S. Department ofa*griculture Albany, California, USA
Renata Antoun Simão PEMM/COPPE Universidade Federal do RiodeJaneiro Rio de Janeiro, Brazil
Sandra Leticia Rodriguez-Ambriz Centro de Desarrollo de Productos Bióticos del IPN Yautepec, Morelos, México
Maria Inês Bruno Tavares Instituto de Macromoléculas EloisaMano Universidade Federal do RiodeJaneiro Rio de Janeiro, Brazil
Mirna Maria Sanchez-Rivera Centro de Desarrollo de Productos Bióticos del IPN Yautepec, Morelos, México Derval dos Santos Rosa Universidade Federal do ABC Santo André, Brazil
Rossana Mara da Silva MoreiraThiré PEMM/COPPE Universidade Federal do RiodeJaneiro Rio de Janeiro, Brazil
chapter one
Trends in starch applications Andréa C. Bertolini
EMBRAPA Agroindústria de Alimentos
Contents 1.1 Introduction: The starch granule............................................................. 1 1.1.1 Granular structure......................................................................... 1 1.1.2 Starch gelatinization...................................................................... 3 1.2 Sources and producers of starch.............................................................. 4 1.3 Starch applications..................................................................................... 6 1.3.1 Food applications........................................................................... 8 1.3.1.1 Texturing, thickening/gelling, retrogradation and freeze–thaw stabilizer, emulsifying agent, gel strength and clarity, and cold-water swelling...... 8 1.3.1.2 Dextrins, sweeteners, and syrups............................... 10 1.3.1.3 Health and functional foods....................................... 11 1.3.1.4 Edible coatings.............................................................. 13 1.3.2 Nonfood applications.................................................................. 13 1.3 Final remarks............................................................................................ 15 References........................................................................................................... 15 Special thanks.................................................................................................... 19
1.1 Introduction: The starch granule 1.1.1 Granular structure Starch is organized in discrete particles, granules whose size, shape, morphology, composition, and supramolecular structure depend on the botanical source. The diameters of the granules generally range from less than 1 µm to more than 100 µm, and shapes can be regular (e.g., spherical, ovoid, or angular) or quite irregular. Starch granules are partially crystalline particles composed mainly of two hom*opolymers of glucopyranose with different structures: amylose, which is composed of units of D-glucose linked through α–D–(1–4) linkages and amylopectin, 1
2
Starches: Characterization, Properties, and Applications
the branching polymer of starch, composed of α–D–(1–4)-linked glucose segments containing glucose units in α–D (1–6) branches. Amylose is an essentially linear polymer, although evidence has suggested some branches in its structure. Consequently, 4–9% of the population called “intermediate material or amylose-like” has been considered part of normal and high amylose starches (Tang, Mitsunaga, and Kawamura, 2006). Amylose can also present as a hydrophobic helix, allowing the forming of a complex with free fatty acids, fatty acid components of glycerides, some alcohols, and iodine (Thomas and Atwell, 2005). Amylopectin is larger than amylose in most normal starches and their chains are classified as small chains, with an average degree of polymerization (DP) of about 15, and large chains, in which the DP is larger than 45. This unique configuration ordered in the packing arrangement contributes to the crystalline nature of the starch granule. This crystallinity reflects the organization of amylopectin molecules within the starch granules, whereas amylose makes up most of the amorphous materials that are randomly distributed among the amylopectin clusters (Blanshard, 1987). Under polarized light, the starch granule shows a characteristic Maltese cross (Figure1.1), reflecting its birefringent structure, which was suggested as a correlation between the molecular and principal optic axes, underscoring that packing of the amylose and amylopectin is radial (Banks et al., 1972). This observation can be corroborated by results obtained by x-ray diffraction (Waigh et al., 1997).
Figure 1.1 Maltese cross in starch granules observed under polarized light.
Chapter one: Trends in starch applications
3
Consequently, the architecture or structure of a starch granule is influenced in part by the fine structures and ratios of amylose and amylopectin molecules. Finally, the granule architecture in turn determines the accessibility of the starch structure to water and chemical reagents, affecting molecular reaction patterns and properties of modified starches. The chemistry and technology of starch have been reviewed in detail several times (Whistler, BeMiller, and Paschall, 1984; Zobel, 1988; Eliasson, 2004; BeMiller, 2007). Some aspects of granule starch observations are considered in Chapter 2 and details of starch macromolecular structure are discussed in Chapters 3 and 4.
1.1.2 Starch gelatinization Starch gelatinization involves granule melting in an aqueous medium under heating. In water, granule swelling increases with temperature and it leads to a transfer of water in the suspension to water associated with starch components: amylose and amylopectin. When starch temperature reaches 60–70ºC, insoluble granules are disrupted by the energy supplied, resulting in a loss of molecular organization and, consequently, loss of its crystallinity. This process leads to increasing viscosity and starch solubilization, which is a result of irreversible changes such as the disruption of granular and semicrystalline structure, also seen as a loss of birefringence (Douzals et al., 1996). After heating followed by gelatinization, during the cooling phase, starch undergoes retrogradation in which the starch chains tend to reassociate in an ordered structure. It is followed by another rise in viscosity, usually referred to as setback. The pasting profile of previously gelatinized starch does not show a viscosity increase when exposed to changes in temperature, evidence that this starch sample was already gelatinized (Rosa, Guedes, and Pedroso, 2004). Differences in swelling among native starches have been attributed to interplay of factors such as granule size, crystallinity, amylose–lipid complex content, and interaction among starch chains in the amorphous region. The physicochemical properties of amylose and amylopectin are quite diverse and they contribute in different ways to the pasting properties of starch. In Figure1.2, the viscoamilographic graph shows the differences of pasting profiles of cassava and corn starches. Understanding starch thermal transitions and starch rheological behavior is essential for studying starch structure, as well as for proposing new starch applications. The main aspects of rheological and thermal properties of starches are discussed in detail in Chapters 5 and 6.
Starches: Characterization, Properties, and Applications 250
100
200
80
150
60
100
40
50
20
5
10 15 Time (min)
20
25
Temperature (°C)
Paste Viscosity (RVU)
4
Figure 1.2 Pasting profiles of cassava (▲) and corn (◦)starches, under temperature (–) changes.
1.2 Sources and producers of starch Starches are the major storage polysaccharides in foods of plant origin. Worldwide dry starch production is actually estimated at more than 64 million tons and almost 75 million tons are expected by 2012 (Patil, 2009). Current annual production for primary starch sources is estimated to be 46.1 million tons of corn, 9.1 million tons of cassava, 5.15 million tons of wheat, and 2.45 million tons of potato (Röper and Elvers, 2008). Starches from cereals come mainly from corn and wheat. European countries are responsible for around 60% and Asia produces 20% of the global production of wheat starch used in dextrin and modified starches. The United States is still the largest producer of corn starch in the world (LMC, 2008). In Western Europe, 46% of produced starch is from corn, 36% from wheat, and 19% from potato starches (Röper and Elvers, 2008), whereas North American production of starch is based almost entirely on corn (LMC, 2008). Actually, the Asian corn starch sector, particularly in China, is growing consistently at over 15% per year, competing with United States and European producers (LMC, 2008). Because of their lower moisture content, cereals have longer storage times and their starch extraction is easier and faster than in roots and tubers. For example, in cassava, high water consumption is a critical factor in the starch extraction process. In this process, water is used during the grinding, decantation, and washing steps and these large quantities
Chapter one: Trends in starch applications
5
of water are converted to wastewater, which must be treated before being released to the environment. Liquid waste has a high biochemical and chemical oxygen demand; its treatment comprises several steps and requires a long retention time. After extraction and separation, starch moisture content is from 35 to 40%, requiring a great deal of energy in the drying process (Sriroth et al., 2000). Although cassava production is growing and starch from cassava competes with the corn processors (Patil, 2009), corn still remains the main starch source in the world, followed by cassava, potato, and wheat. More than 70% of starch produced in the world is from corn (Röper and Elvers, 2008) (Figure1.3). However, starch from roots and tubers shows some particular rheological and physical properties, such as clear gel, high viscosity, and lower retrogradation, which are required in the formulation of specific products. Demand for cassava starch has grown in the past few years and it is actually the most widely traded form of native starch in the world, mainly in Thailand and East Asia. Asia contributes around 90% of cassava starch produced for use in industry (LMC, 2008), with Thailand being the major producing country, followed by China and Indonesia (FAO, 2008). In 2006, around 3.5 × 106 tons of cassava starch were produced in Thailand. Of this amount, 2.3 × 106 tons were exported, with 1.67 × 106 tons as native starch and 638 × 103 tons as modified starches (Röper and Elvers, 2008). In South America, which is responsible for the other 10% of cassava starch production, Brazil is the main producer (FAO, 2008). Considering starches from roots and tubers, potato starch is the second largest starch source. In Europe, strong support of the grain sector has resulted in decreasing production of potato starch (LMC, 2008). However, Potato 4%
Others 1%
Wheat 8% Cassava 14%
Corn 73%
Figure 1.3 Starch production according to botanic sources. Source: Röper and Elvers (2008).
6
Starches: Characterization, Properties, and Applications
Wheat starch
Potato starch 2007 2006 2005
Cassava starch
Corn starch 0
2,000,000
4,000,000
6,000,000
8,000,000 10,000,000 12,000,000 14,000,000
Starch (ton)
Figure 1.4 Amounts of starches used as food ingredients, dextrins, paper coatings, and adhesives between 2005 and 2007. Source: LCM (2008).
European countries are still responsible for 80% of potato starch production in the world (LMC, 2008), with the Netherlands, France, Belgium, Germany, and Switzerland as the main potato producers (FAO, 2008). Figure 1.4 illustrates the amounts of starches from several sources used in syrup production or fermented products, used as food ingredients, dextrin, paper coatings, and adhesives for three consecutive years (LMC, 2008). A small amount of rice starch production originates from Europe and Asia (LMC, 2008), while arrowroot, amaranth, banana, mung bean, sweet potato, taro, and yam are considered as minor sources of starch produced in tropical countries.
1.3 Starch applications Due to its low cost, availability, and ability to impart a broad range of functional properties to food and nonfood products (Jane, 1995; BeMiller, 2007), starch is utilized in several industrial applications (Whistler, BeMiller, and Paschall, 1984). Although the use of starch was always considered essential as a staple food and food ingredient, due to its attractive cost and performance, starch has been one of the most promising candidates for future materials (Rindlav-Westling et al., 1998). Starches are used mainly in the food and paper industries, with 57% of produced starch consumed in the food industries and 43% in the nonfood sector (LMC, 2008). Modified and native starches represent more than 85% of all hydrocolloids used in food systems (Wanous, 2004). In the food industry, the main trend in starch applications remains in syrup production and formulation of ready meals and various sauces. From total worldwide starch production, excluding starch used to produce syrups and fermented products, more than 30 million tons of natural
Chapter one: Trends in starch applications Chemical fermentation and other uses 14%
Paper and corrugating 28%
7
Feeds 1%
Confectionery and drinks 30% Processed food 27%
Figure 1.5 Use of starches and their derivatives by European industries. Source: Röper and Elvers (2008).
and modified starches are used in the production of dextrin, food ingredients, paper coatings, and adhesives (LMC, 2008). In Europe, 57% of produced starch is used in sweeteners and hydrolized, 23% as native starch, and 20% as modified starch. In European industries, the use of starch in sweet, drink, and fruit processing is equivalent to 30% of produced starch. Convenience foods, bakery, food ingredients, and dairy products account for 27%; the paper industry consumes 28%; and chemical, fermentation, and other industrial products utilize 14%. Starch usage in feeds is 1% (Röper and Elvers, 2008) (Figure1.5). However, in the United States most production is not destined for native and modified starch products, but for sweeteners, particularly high fructose corn syrup (LMC, 2008). More than 73% of corn starch produced in North America is used in U.S. production of refinery products such as glycose syrups, high fructose syrups, syrup solids, maltodextrins, and fructose (Röper and Elvers, 2008). In addition to the demand for starch to produce syrups and dextrin, the demand for modified starches has grown in past years. Modified starches are produced mainly in North America and Europe. Europe is still one of the leading producers of modified starches and its paper and food industries tend to be at the forefront in their use of innovative new products (LMC, 2008). In Table 8.1 of Chapter 8, which provides details about modified starches, the main industrial applications of modified starches are summarized. Asian markets, among others, demand large amounts of starches used in fermentation. The United States, following the world economy, has focused on starch to biofuel production. However, there is a trend for
8
Starches: Characterization, Properties, and Applications
the demand for starch by nonfood industries to grow faster than demand for starch by food industries.
1.3.1 Food applications Starch is the main reserve in plants and supplies between 70–80% of the calories consumed by people. In the food industry, starch can be considered as the principal component of several food formulations and it is responsible for important functional properties and nutritional characteristics. However, starches are not only used as a staple food, but also in a wide range of applications in food formulation and the beverage industry. Inasmuch as extensive reviews have been done about starches in the food industry (Eliasson, 2004; BeMiller, 2007), a general overview and main trends of starch applications in food products are discussed here.
1.3.1.1 Texturing, thickening/gelling, retrogradation and freeze–thaw stabilizer, emulsifying agent, gel strength and clarity, and cold-water swelling In food, starches and their derivatives are used as ingredients, in small or large quantities, to improve the aspect, conservation, or properties. Because of the relation between structure and functionality, starch chemistry and modifying technologies have been studied to obtain structures with specific functionalities. Although starch constitutes an excellent raw material to modify food texture and consistency, starch functionality depends on molecular average weight of amylose and amylopectin, as well as on their molecular organization within the granule. The choice of the right starch within food applications must take into consideration such aspects as food process technology, functional, sensorial, and rheological properties, and co-ingredients. Native and modified starches are used frequently in foods because of their thickening and gelling properties. Typically, native starch cannot be used at a rate higher than 6% in solids because it imparts such a high viscosity. However, for several applications native starches can show undesirable properties under certain process conditions such as temperature, pH, or pressure. These properties can limit their industrial applications, due to their low resistance to high shear rates, thermal decomposition, high retrogradation, and syneresis. Improvement in these starch properties can be achieved by modifications of starch structure, using chemical, physical, and enzymatic methods. Physically modified starches, the pregelatinized starches, which do not require cooking, are very popular in the food industry. Swollen but intact starch granules are usually desired in most food starch applications to maintain rheological properties (Miyazaki et al., 2006; Kaur, Singh,
Chapter one: Trends in starch applications
9
and Singh, 2006). They are used to control the cold viscosity and can be cross-linked and stabilized to provide shear and freeze–thaw stability. Granular cold-water soluble starches showed important functional properties for several instant foods, such as a higher viscosity and a soft texture (Bello-Perez et al., 2002). Because they develop viscosity immediately they are typically used in instant dry mixes such as instant puddings, in baby foods, frozen foods, and convenience products. In some applications such as salad dressing, starch can be incorporated into the oil phase to slow down hydration when water is added later, useful in sauce and puree formulation. Modified starches can present functional derivatives, supporting new product development, improving processing technologies, and influencing market trends. Oxidized starches show reduced swelling power, increased solubility, and lower pasting temperature than native starch (Kuakpetoon and Wang, 2001) and they are used in products demanding softness and transparency, like gum sweets or Arabic gums (Chattopadhyaya, Singhal, and Kulkarni, 1998). Acetylated starches are used to prevent retrogradation by interrupting the linearity of the amylose or segments of the amylopectin branches, reducing syneresis and loss of texture and consistency during storage of the finished product (Filer, 1998). Acetylating reduces bond strength and increases the swelling power and solubility of the starch granule, improving freeze–thaw stability (Rutenberg and Solarek, 1984). Consequently, these starches have physicochemical characteristics such as low gelatinization temperature, high solubility, and good cooking and storage stabilities, and are widely used in the food industry to overcome undesirable changes in product texture and appearance caused by retrogradation during food processing and storage. They are extensively used in a wide range of foods including baked goods, canned pie fillings, sauces, condensed soups, frozen foods, baby foods, salad dressings, and snack foods. Modified starches by succinate derivatives are characterized by the tendency to swell in cold water, and to show higher viscosity and lower gelatinization temperature than their base starch. In food areas, succinate derivatives have been recommended as binders and thickening agents in soups, snacks, and canned and refrigerated food products (Wurzburg, 1986), encapsulating flavor oils, emulsion stabilizers, and enhancing oxidation resistance (Trubiano, 1995). Hydroxypropylated starches improve the shelf life, freeze–thaw stability, cold-storage stability, clarity, and texture properties of starch paste. Because of the slow retrogradation of amylopectin, it is very effective in retarding bread staling and improving bread crumb texture, enhancing breadmaking functionality and bread quality (Miyazaki et al., 2006). Hydroxypropylated starches are also effective thickening and stabilizing
10
Starches: Characterization, Properties, and Applications
agents in low-fat or low-calorie dairy products due to their greater compatibility with milk protein. Frequently, the structure of starch is reinforced by the application of cross-linking in order to improve the product’s texture and its resistance to rupture during processing. Cross-linked starches are more resistant to low pH, rupture, and high temperatures, and show high capacity of holding water (Jarowenko, 1986). However, cross-linking also reduces paste clarity and stability against cold storage. Because cross-linking reduces starch granule rupture, the loss of viscosity, and the formation of a stringy paste during cooking, cross-linked starches are widely used as thickeners in foods, particularly where a high and stable viscosity is needed. Therefore, further modifications such as hydroxypropylation and acetylation are used to change undesirable characteristics of cross-linked starch (Gunaratne and Corke, 2007). Cross-linking of hydroxypropylated starch, for example, imparts viscosity stability and a desired short-textured property of the paste. The main techniques, properties, and trends of modified starches are discussed in Chapter 8.
1.3.1.2 Dextrins, sweeteners, and syrups Starch hydrolysis has been used in the food industry to convert starches, starch derivatives, and starch saccharification products, which have several applications in food processing. The products from starch hydrolysis are certainly the more versatile ingredients used in the food industry and they are used in a wide range of food products due to both their functional and nutritional properties. They can be obtained through acid catalysis or specific enzyme action. Initially, industrial hydrolysis of starch was done by inorganic acids, however, the use of enzymes has successfully replaced the chemical process. Enzymatic hydrolysis allows greater control and high specificity of reaction, better stability of generated products, lower energy requirements, and does not require neutralization steps. Moreover, the milder enzymatic catalysis conditions reduce unwanted side reactions and the formation of off-flavor and off-color compounds. The starch-processing industry is the second largest segment of the industrial enzyme market, representing approximately 30% of world enzyme production. The major enzymes are amylases, glucoamylases, and glucose isomerases which are used in starch liquefaction, saccharification, and isomerization. Chapter 7 discusses some trends in amylase production used in starch hydrolysis. Products from starch hydrolysis such as glucose or maltose syrup and maltodextrins and their derivates by isomerization (iso-glucose and fructose) are used in candy, sweet, chocolate, cake, dessert, dairy, and pastry products due to their anticrystallizing, sweetening, and water-holding properties. Sugar syrups and their derivatives are the most popular hydrolized starch used in fermentation processes, beverage formulation, dietetic products, ice creams, soft gum, dairy products, desserts, and
Chapter one: Trends in starch applications
11
candies. Maltodextrins have functional properties and are employed for their thickening properties, prevention of crystallization, control of freezing, and stabilization (Blanshard and Katz, 1995; Loret et al., 2004).
1.3.1.3 Health and functional foods In the food industry, starch in formulations of health, nutritional, and functional products has been considered one of the most promising markets and it has motivated research in development of new products. This trend supports the development of modern products such as frozen, chilled, low-fat, and gluten-free foods, where starch can be used as the main or co-ingredient. For example, health nutrition trends for enhanced fiber consumption with emphasis on low glycemic food have pushed the growth of high amylose starch as a source of resistant starch (RS). Resistant starches result from the formation of glycosidic bonds, other than the α–(1–4) or α–(1–6) links by treatments involving heating, cross-linking, hydroxypropylation, or phosphatation, which can reduce the digestibility of the starch (Englyst et al., 1996; Woo and Seib, 2002). Amylose content, water content, storage time and temperature of the starch gels, number of autoclaving/cooling cycles, and the presence of lipids and proteins are some processing factors that can affect the formation of RS (Gidley et al., 1995; Kale et al., 2002). Those starches are resistant to degradation or are not digested/absorbed in the small intestines of healthy individuals, and are fermented in the large intestine (Champ, 1992; Eerlingen and Delcour, 1995), simulating fiber action in the intestinal tract (Englyst et al., 1996). They can replace fibers in food formulation without changing their sensory properties (Lee and Shin, 2006). Studies showed that addition of RS in the diets of rats contributed significantly to the increase of fecal volume (Gee, Johnson, and Lund, 1992; Deckere, Kloots, and Van Amelsvoort, 1992; Cummings et al., 1996) and its in vitro fermentation suggests RS induces the cellular proliferation, growth of bacteria, fermentation, and production of short chain fatty acids (Annison and Topping, 1994; Cummings et al., 1996; Englyst et al., 1996; Bird, Brown, and Topping, 2006), indicating that it can behave as a probiotic food. Resistant starches can be classified according to four categories: Type I, represented by the inaccessible starch, which is protected by the wall cell; Type II, the native starch granule found in food that is not cooked, with reduced susceptibility to enzyme action; Type III, the starch fraction not digested, formed by hydrothermal treatments that cause retrogradation; and, Type IV, the chemical modified starch. More discussion about RSs and their structure is provided in Chapter 8. Another trend in health food is the concern to reduce fat ingestion. A diet rich in fats is associated with an increase in obesity and its effects. Clinical and experimental studies provide evidence of the relationship of the consumption of saturated fat and high blood cholesterol and heart
12
Starches: Characterization, Properties, and Applications
disease (Giese, 1996; Livesey, 2003). However, diets rich in fiber and low in fat have been recommended considering that they would decrease the risk of chronic diseases such as arthritis, cancer, osteoporosis, and heart disease (Lajolo, 2001). Fat, however, is an indispensable nutrient and plays a functional and sensory role in food: it is responsible for the stability, palatability, flavor, texture, structure, brightness, aroma, and sensation of satiety (de Wijk and Prinz, 2006). Consequently, in past years there has been increasing research regarding the improvement of quality and sensory characteristics of low-fat products (Giese, 1996; Livesey, 2003; de Wijk and Prinz, 2006). Several starch derivatives have shown to be promising replacements for fat properties, probably due to their water association systems (Yackel and Cox, 1992; Filer, 1998). To replace fat in food systems, starch modifications must improve their stability in cold water, improve their characteristics as dough or gel texture, or provide emulsifying characteristics through the addition of hydrophobic groups (Alexander, 1995). Starch has been used in several low-fat products to improve some properties such as texture, color, palatability, and stability of foods (Harris and Day, 1993; Esteller, Amaral, and Lannes, 2004). Hydrolyzed starches have been shown to be excellent substitutes for fat, obtaining similar texture to those observed in high-fat products (Harris and Day, 1993; Alexander, 1995; Giese, 1996). Waxy starches and starches from roots and tubers are largely used in low-fat products. Cassava starch derivatives intercrossed with 0.05% POCl3 and acetylated with 8% acetic anhydride has been shown to be an efficient fat replacer, improving the texture of mayonnaise (Teixeira, 2002). Esterification of starches with fatty acids of a linear chain gives the derivative hydrophobic characteristics and emulsifying properties (BeMiller, 1997) and acetylated starches improve stability in low-fat systems (Jarowenko, 1986). However, to replace fat, starches should maintain high moisture content in systems such as mayonnaise, salad dressings, and low-fat spreads. Starches as fat replacers can also be used in bakery products such as cakes, however, they are not recommended for systems with a low moisture content such as cookies and crackers (Giese, 1996; Razavi, Najafi, and Alaee, 2007; Sudha et al., 2007). Fermented starches are often employed in traditional culinary arts, and they have also been used as ingredients in the food industry. Sour cassava starch is an example of cassava starch modified by fermentation and sun drying, with its characteristic expansion property. For this reason, sour cassava starch is used in bakery products leading to volume expansion without the addition of yeast, biological baking powder, or chemical agents (Bertolini et al., 2001). It is used in breadmaking and biscuit formulation and it can be an alternative for gluten-free products consumed by people who are intolerant to wheat gluten.
Chapter one: Trends in starch applications
13
1.3.1.4 Edible coatings Biopolymers such as lipids, proteins, derivatives of cellulose, starch, and other polysaccharides have been tested in the formulation of edible films and coatings. Recently there has been increasing interest in the development of films and edible coatings that can be used to increase the shelf-life of fruits and vegetables (Pagella, Spigno, and de Faveri, 2002). Starch gelatinized with NaOH, glycerol, or sorbitol can be used as plasticizers in edible coatings and films (Larotonda et al., 2004; Cyras, Zenklusen, and Vazquez, 2006), and blends of pectin and high amylose corn starch also have been suggested to produce food coatings and films (Dimantov, Kesselman, and Shimoni, 2004). Some properties of starch-based films and thermoplastic starches are discussed in detail in Chapter 6.
1.3.2 Nonfood applications In nonfood applications, the most traditional use of starch has been in the paper industry. After food, the paper industry is the largest consumer of starch, estimated at more than 10 million tons per year. Recently, with the increasing cost of cellulose pulp, paper producers have begun to look at lower cost fillers. These fillers often require special modified starches to bind them to the pulp. Consequently, several innovations in this area have increased the share of starch used in those applications (LMC, 2008). Oxidized (Lawala et al., 2005) and enzymatic hydrolized (van der Maarel et al., 2002) starches have wide applications as paper coating, improving the strength and printability of paper. Those starches are also often used in textile and laundry finishing products (Lawala et al., 2005). Recently, interest in development of biodegradable polymers has grown and, as a consequence, it has resulted in the development of new biodegradable products (Stevens, 1999). Biodegradable polymers are an alternative to overcome the problems related to fossil resources, recycling limitations, and the global environment. Furthermore, biobased material can be recycled through composting, providing support for a sustainable agriculture. This has resulted in a strong trend to replace synthetic materials with biodegradable polymers. However, the high cost of producing biodegradable polymers compared to conventional plastics is still a major problem to be solved but this is expected to decrease with time. Starch is considered as a potential polymer to be used in biodegradable materials because of its low cost, availability, and production from renewable resources. Because it is a thermoplastic material, it has been used to produce blends with nonbiodegradable polymers, biodegradable materials, and injection molding (Dufresne, 2007). Some aspects of thermoplastic starches are covered in Chapter 6.
14
Starches: Characterization, Properties, and Applications
In recent years, most of the starch-based polymers produced are used for packaging applications, including soluble films for industrial packaging. Loose-fill containers and transparent films are widely used in the packaging industry. Biodegradable bags are used for waste collection and for disposable cutlery, whereas biodegradable films are used for agricultural mulching, pet products, and hygiene, including cotton buds, packaging for toilet paper, overwrap, and backing material for flushable sanitary products. Pencil sharpeners, rulers, cartridges, toys, and plant pots are among the other uses (Alonso et al., 1999; Karim, Norziah, and Seow, 2000). Starch-based plastics are highly hydrophilic and readily disintegrate on contact with water. There is increasing interest in biomaterials in development of biodegradable products. Details about biodegradation of starch-based biomaterials are discussed in Chapter 10. Starches used as thermoplastic materials have some limitations such as low moisture resistance, high viscosity, and incompatibility with some hydrophobic polymers. In packaging applications, the major drawbacks associated with the use of starch-based materials are their hydrophilic nature, poor mechanic properties, and brittleness, especially if not well plasticized to prevent moisture effects and postprocessing crystallization. Starch-based packages generally absorb moisture and undergo environmental stress cracking, causing significant problems with shelf-life storage. Therefore, any improvement in these properties is of fundamental importance to assure durability of both packages and stored products. Starches modified by chemical treatment have been utilized as an alternative to solve this problem. To enhance viscosity, texture, and stability among many desired functional properties for industrial applications, starches and their derivatives are modified by chemical, physical, and biotechnological means. Consequently, due to the wide range of industrial applications, modified starch derivatives have high added value. Starch-based and biodegradable polymers have been used in the production of automotive parts (Leão et al., 2007) and nanoparticle-sized cornderived starch can also be used in a wide range of products (Dufresne, 2007) including as a biofiller to enhance tire performance, reducing the rolling resistance of tires and fuel consumption (Scott, 2002). In addition to the use of starches in the paper and textile industries and to obtain new biodegradable materials, there is the fuel market. With new trends in the biofuel and bioethanol market, there has been increasing interest in some starchy crops. Biofuel production, particularly in the United States, has put considerable strain on the corn crop and China has suspended further production of ethanol and other starch derivatives from corn to protect domestic food and feed consumption of corn (LMC, 2008). However, in bioethanol production, sugarcane is still more competitive than starch. Consequently, concerning this starch application, it
Chapter one: Trends in starch applications
15
is necessary to improve conversion technology in order to increase the ethanol yield.
1.3 Final remarks Corn starch remains the most used starch in the world, the United States being its largest producer. However, concerning cassava starch, Thailand is growing as the leading exporter of native starch and starch derivatives. Whereas corn starch is used to produce mainly modified starches and syrups, cassava starch is actually the most widely traded native starch in the world. Demand for native and modified starches closely follows growth in the food and paper industries. The largest applications of starch in the food industry include syrups, formulation of ready meals, instant food, and sauces, and, in the paper industry, as paper coating. However, starch application is also increasing in health, nutritional, and functional foods, considered as a potential food market. Moreover, due to the increasing demand for raw material by biofuel and bioethanol production sectors, there is decreasing availability of starchy material to be used in the food and paper industries. This tendency will influence policy guidelines on crop production in several countries. The increased value of modified starch remains very high due to several food and industrial applications. There are several new technologies that can improve the production of modified starches. Due to progress in plant breeding, a wide range of starch sources is available. Nowadays the understanding of starch behavior requires strong knowledge of physical chemistry and rheology because the goal is to provide qualitative information related to starch modification. New varieties of cereal and roots with high resistant starch or high sugar content, potato with high phosphate content, and corn with amylase and other enzymes activated in the grain to improve processing are some examples of these modified starches.
References Alexander, R.J. 1995. Fat replacers based on starch. Cereal Foods World. 40(5):366–368. Alonso, A.G., Escrig, A.J., Carrón, N.M., Bravo, L., and Calixto, F.S. 1999. Assessment of some parameters involved in the gelatinization and retrodegradation of starch. Food Chem. 66:181–187. Annison, G. and Topping, D.L. 1994. Nutritional role of resistant starch: Chemical structure vs physiological function. Ann. Rev. Nutrition. 14:297–320. Banks, W., Geddes, R., Greenwood, C.T., and Jones, I.G. 1972. Physicochemical studies on starches. Starch. 24:245–280.
16
Starches: Characterization, Properties, and Applications
Bello-Perez, L.A., Contreras-Ramos, S.M., Romero-Manilla, R., Solorza-Feria, J., and Jiménez-Aparicio, A. 2002. Chemical and functional properties of modified starch from banana Musa paradisiaca L. Agrociencia. 36(2):169–180. BeMiller, J.N. 1997. Structure of the starch granule. J. Appl. Glycosci. 44:43–49. BeMiller, J.N. 2007. Carbohydrate Chemistry for Food Scientists. St. Paul, MN: AACC International, Inc. Bertolini, A.C., Mestres, C., Lourdin, D., Della Valle, G., and Colonna, P. 2001. Relationship between thermomechanical properties and baking expansion of sour cassava starch. J. Sci. Food Agric. 81(4):429–435. Bird, A.R., Brown, I.L., and Topping, D.L. 2006. Low and high amylose maize starches acetylated by a commercial or a laboratory process both deliver acetate to the large bowel of rats. Food Hydrocolloids. 8:1135–1140. Blanshard, J.M.V. 1987. Starch granule structure and function: A physicochemical approach. In:. Starch: Properties and Potential, T. Galliard (Ed.). Chichester: John Wiley & Sons, 1987, p. 16. Blanshard, P.H. and Katz, F.R. 1995. Starch hydrolysates. In: Food Polysaccharides and Their Applications, A.M. Stephen (Ed.). New York: Marcel Dekker. pp. 99–153. Champ, M. 1992. Determination of resistant starch in foods and food products: Interlaboratory study. Euro. J. Clin. Nutrition. 46(2):51–62. Chattopadhyaya, S., Singhal, R.S., and Kulkarni, P.R. 1998. Oxidised starch as gum arabic substitute for encapsulation of flavours. Carbohydrate Polym. 2:143–144. Cummings, J.H., Beatty, E.R., Kingman, S.M., Bingham, S.A., and Englyst, H.N. 1996. Digestion and physiological properties of resistant starch in human large bowel. Brit. J. Nutrition. 75(5):733–747. Cyras, V.P., Zenklusen, M.C.T., and Vazquez, A. 2006. Relationship between structure and properties of modified potato starch biodegradable films. J. Appl. Polym. Sci. 6:4313–4319. de Wijk, R.A. and Prinz, J.F. 2006. Mechanisms underlying the role of friction in oral texture. J. Texture Stud. 4:413–427. Deckere, E.A.M., Kloots, W.J., and Van Amelsvoort, J.M.M. 1992. Effects of a diet with resistant starch in the rat. Euro. J. Clin. Nutrition. 46(2):121–122. Dimantov, A., Kesselman, E., and Shimoni, E. 2004. Surface characterization and dissolution properties of high amylose corn starch-pectin coatings. Food Hydrocolloids. 1:29–37. Douzals, J.P., Marechal, P.A., Coquille, J.C., and Gervais, P. 1996. Microscopic study of starch gelatinization under high hydrostatic pressure. J. Agric. Food Chem. 44:1403–1408. Dufresne, A. 2007. Biopolymers on nanocomposities. In: Biopolymers Technology, A.C. Bertolini (Ed.). São Paulo: Cultura Academica, pp. 59–84. Eerlingen, R.C. and Delcour, J.A. 1995. Formation, analysis, structure and properties of type lll enzyme resistant starch. J. Cereal Sci. 22:129–138. Eliasson, A.-C. 2004. Starch in Food: Structure, Functions and Applications. Cambridge, UK: Woodhead. Englyst, H.N., Kingman, S.M., Hudson, G.J., and Cummings, J.H. 1996. Measurement of resistant starch in vitro and in vivo. Brit. J. Nutrition. 75(5):749–755. Esteller, M.S., Amaral, R.L., and Lannes, S.C.D. 2004. Effect of sugar and fat replacers on the texture of baked goods. J. Texture Stud. 4:383–393.
Chapter one: Trends in starch applications
17
FAO 2008. Food Agriculture Organization. Food Outlook November. ftp://ftp. fao.org/docrep/fao/011/ai474e/ai474e00.pdf. Filer, L. J. 1998. Modified food starch: An update. J. Amer. Diet. Assoc. 88(3). Gee, J.M., Johnson, J.T., and Lund, E.K. 1992. Physiological properties of resistant starch. Euro. J. Clin. Nutrition. 46(2):125. Gidley, M.J., Cooke, O., Darks, A.H., Hoffmann, R.A., Russel, A.L., and Greenwell, P. 1995. Molecular order and structure in enzyme resistant retrograded starch. Carbohydrate Polym. 28:23–31. Giese, J. 1996. Fat, oils, and fat replacers. Food Technol. 50(4):77–83. Gunaratne, A. and Corke, H. 2007. Functional properties of hydroxypropylated, cross-linked, and hydroxypropylated cross-linked tuber and root starches. Cereal Chem. 84:30–37. Harris, D. and Day, G. A. 1993. Structure versus functional relationships of a new starch-based fat replacer. Starch/Stärke. 45(7):221–226. Jane, J.-L. 1995. Starch properties, modifications, and applications. J. Macromol. Sci. Pure Appl. Chem. A32:751–757. Jarowenko, W. 1986. Acetylated starch and miscellaneous organic esters. In: Modified Starches: Properties and Uses, O.B. Wurzburg (Ed.). Boca Raton, FL: CRC Press, pp. 55–57. Kale, C.K, Kotecha, P.M., Chavan, J.K., and Kadam, S.S. 2002. Effect of processing conditions of bakery products on formation of resistant starch. J. Food Sci. Technol. 5:520–524. Karim, A.A., Norziah, M.H., and Seow, C.C. 2000. Methods for the study of starch retrogradation. Food Chem. 71:9–36. Kaur, L., Singh, J., and Singh, N. 2006. Effect of cross-linking on some properties of potato (Solanum tuberosum L.) starches. J. Sci. Food Agric. 86:1945–1954. Kuakpetoon, D. and Wang, Y.J. 2001. Characterization of different starches oxidized by hypochlorite. Starch/Stärke. 53:211–218. Lajolo, F. M. 2001. Fibra dietética en iberoamérica: tecnologia y salud (obtención, caracterización, efecto fisiológico y aplicación en alimentos). São Paulo: Varela. Larotonda, F.D.S., Matsui, K.N., Soldi, V., and Laurindo, J.B. 2004. Biodegradable films made from raw and acetylated cassava starch. Brazil. Arch. Biol. Technol. 3:477–484. Lawala, O.S., Adebowaleb, K.O., Ogunsanwoa, B.M., Barbac, L.L., and Ilod, N.S. 2005. Oxidized and acid thinned starch derivatives of hybrid maize: Functional characteristics, wide-angle X-ray diffractometry and thermal properties. Int. J. Biol. Macromol. 35:71–79. Leão, A.L., Ferrão, P.C., Teixeira, R., and Sator, S. 2007. Biopolymers applications on automotive industry. In: Biopolymers Technology, A.C. Bertolini (Ed.). São Paulo: Cultura Academica, pp.165–195. Lee, H. and Shin, M. 2006. Comparison of the properties of wheat flours supplemented with various dietary fibers. Food Sci. Biotechnol. 5:746–751. Livesey, G. 2003. Health potential of polyols as sugar replacers, with emphasis on low glycaemic properties. Nutrition Res. Rev. 2:163–191. LMC. 2008. LMC International’s Global Markets for Starch and Fermentation Products Database 2008 report. http://www.lmc.co.uk/Report. aspx?id=6&repID=2983&flag=1537 Loret, C., Meunier, V., Frith, W.J., and Fryer, P.J. 2004. Rheological characterization of the gelation behaviour of maltodextrin aqueous solution. Carbohydrate Polym. 57(2):153–163.
18
Starches: Characterization, Properties, and Applications
Miyazaki, M., Van Hung, P., Maeda, T., and Morita, N. 2006. Recent advances in application of modified starches for breadmaking. Trends Food Sci. Technol. 11:591–599. Pagella, C., Spigno, G., and de Faveri, D.M. 2002. Characterization of starch based edible coatings. Food Bioprod. Process. 80(3):193–198. Patil, S.K. 2009. Global Modified Starch Products Derivatives and Markets A Strategic Review. February 1, 66 pp. - Pub ID: DBAQ2093916http://www.marketresearch.com/product/display.asp?productid=2093916&SID=49302673446513523-409800162&kw=starch Razavi, S.M.A., Najafi, M.B.H., and Alaee, Z. 2007. The time independent rheological properties of low fat sesame paste/date syrup blends as a function of fat substitutes and temperature. Food Hydrocolloids. 2:198–202. Rindlav-Westling, Å., Stading, M., Hermansson, A.-M., and Gatenholm, P. 1998. Structure, mechanical and barrier properties of amylose and amylopectin films. Carbohydrate Polym. 36:217–224. Röper, H. and Elvers, B. 2008. Starch. 3. Economic Aspects. In: Ullman’s Encyclopedia of Industrial Chemistry (7th ed.). New York: John Wiley & Sons, pp. 21–22. Rosa, D.S., Guedes, C.G.F., and Pedroso, A.G. 2004. Gelatinized and nongelatinized corn starch/poly(ε-caprolactone) blends: Characterization by rheological, mechanical and morphological properties. Polímeros: Ciência e Tecnologia. 14:181–186. Rutenberg, M.W. and Solarek, D. 1984. Starch derivatives: Production and uses. In Starch Chemistry and Technology, R.L. Whistler, J.N. BeMiller, and E.F. Paschall (Eds.). San Diego: Academic Press, pp. 311–388. Scott, A. 2002. Nanoscale starch challenges silica in fuel-efficient ‘green’ tires. Chem. Week. 164:15–26. Sriroth, K., Piyachomkwan, K., Wanlapatit, S., and Oates, C. 2000. Cassava starch technology: The Thai experience. Starch/Stärke. 52:439–449. Stevens, M.P. 1999. Polymer Chemistry: An Introduction. 3rd ed., New York: Oxford University Press. Sudha, M.L., Srivastava, A.K., Vetrimani, R., and Leelavathi, K. 2007. Fat replacement in soft dough biscuits: Its implications on dough rheology and biscuit quality. J. Food Eng. 3:922–930. Tang, H., Mitsunaga, T., and Kawamura, Y. 2006. Molecular arrangement in blocklets and starch granule architecture, Carbohydrate Polym. 63:555–560. Teixeira, M.A.V. 2002. Amidos quimicamente modificados empregados na substituição de gordura em alimentos, Food Technology doctoral thesis. Universidade Estadual de Campinas, São Paulo, Brazil. Thomas, D.J. and Atwell, W.A. 2005. Starches. St. Paul, MN: Eagan Press. Trubiano, P.C. 1995. The role of specialty food starches in flavor encapsulation. Flavor Technol. (ACS Symposium Series), pp. 244–253. Van der Maarel, M.J.E.C., Van der Veen, B., Uitdehaag, J.C.M, Leemhuis, H., and Dijkhuizen, L. 2002. Properties and applications of starch-converting enzymes of the α-amylase family. J. Biotechnol. 94:137–155. Waigh, T.A., Hopkinson, I.M., Donald, A.M., Butler, M.F., Heideçbach, F., and Riekel, C. 1997. Analysis of the native structure of starch granules with X-ray microfocus. Limited diffraction. Macromolecules. 30:3813–3820. Wanous, M.P. 2004. Texturizing and stabilizing, by gum. Prepared Foods. 173(1):108–118.
Chapter one: Trends in starch applications
19
Whistler, L., BeMiller J.M., and Paschall, E.P. (Eds.). 1984. Starch: Chemistry and Technology (2nd ed.). New York: Academic Press, pp. 313–314. Woo, K.S. and Seib, P.A. 2002. Cross-linked resistant starch: Preparation and properties. Cereal Chem. 6:819–825. Wurzburg, O.B. (Ed.) 1986. Modified Starches: Properties and Uses. Boca Raton, FL: CRC Press. Yackel, W.C. and Cox, C. 1992. Application of starch-based fat replacers. Food Technol. 46(6):146–148. Zobel, H.F. 1988. Molecules to granules: A comprehensive starch review. Starch/ Stärke. 40:44–50.
Special thanks We are grateful to Simon Bentley, head of Grains and Starch Research, LMC International, for providing some of the data discussed in this chapter.
chapter two
Characterization of starch granules An atomic force microscopy approach Renata Antoun Simão
PEMM/COPPE, Universidade Federal do Rio de Janeiro
Beatriz Rosana Cordenunsi
Faculdade de Ciências Farmacêuticas, Universidade de São Paulo
Contents 2.1 Introduction.............................................................................................. 21 2.2 Microscopy as a tool for starch structure elucidation........................ 22 2.2.1 Optical and electron microscopy.............................................. 22 2.2.2 Atomic force microscopy............................................................ 24 2.2.2.1 AFM sample preparation............................................. 24 2.3 The starch granule structure: A microscopic view............................. 26 2.4 Starch gelatinization observed by atomic force microscopy............. 28 2.5 Final remarks............................................................................................ 30 References........................................................................................................... 30
2.1 Introduction It is well established that starch granules are composed of two structurally different polysaccharides of α-D-glucose: amylose and amylopectin. In spite of amylose double helices, the semicrystalline nature of starches is determined by the amylopectin component. The linear amylopectin unit chains (~18–25 units) are relatively short when compared to amylose chains but both can form sixfold left-handed double helices, which in turn associate to form crystalline and semi-crystalline lamellae (Tang, Mitsunaga, and Kawamura, 2006), resulting in a “blocklet model.” The blocklet theory, proposed by Nägeli in 1858 (Kossmann and Lloyd, 2000), was rejected in the 1960s and 1970s and reviewed in 1997, after starch granules were 21
22
Starches: Characterization, Properties, and Applications
imaged by atomic force microscopy (AFM) (Gallant, Bouchet, and Baldwin, 1997). It was observed that repeating units of crystalline and amorphous lamellae are grouped into discrete and elongated structures. It was also observed that, inside on the grains, the polysaccharides are arranged in concentric rings, called growth rings, irradiated from a central hilum. The number and size of these rings are dependent on the botanic origin of the starch and the crop age at harvest time (Tester, Karkalas, and Qi, 2004, Lindeboon, Chang, and Tyler, 2004). A comprehensive review by Tester, Karkalas, and Qi, (2004) integrates aspects of starch composition, interactions, architecture, and functionality. More starch structure details are discussed in Chapter 3. The internal structure of starch grains has been widely studied by microscopy. Knowledge about shape, size, and growth rings typical of starches from several botanic sources has been acquired by optical and electron microscopy. However, information and inferences about the blocklet and granular structure were obtained in past years by AFM. In spite of the many publications about microscopic observation of the starch granule, there are controversies about the most suitable microscopic or starch granule purification method. Even the better microscopic systems can provide unsatisfactory or insignificant images if the samples are not obtained or treated with enough care. Electronic microscopy techniques require sample insertion into a vacuum environment or coating, which can lead to granule damage due to water loss or surface tension and, consequently, to the observation of artifacts. Techniques for granule setting on the sample holder can lead to artifacts and, consequently, provide results that can be wrongly interpreted. Scanning probe microscopy (SPM) techniques, among which the most employed is atomic force microscopy (AFM), can also lead to artifacts due to the multiple interactions between the sample and the tip used as the analysis probe. However, the AFM has been an important tool in understanding starch structure. In this chapter, we discuss some of the main contributions of microscopic techniques to starch structure elucidation.
2.2 Microscopy as a tool for starch structure elucidation 2.2.1 Optical and electron microscopy Even if optical microscopy has a characteristic low resolution, important information can be obtained about starch granules regarding their structural integrity, shape, and size. These characteristics are essential for starch characterization according to botanic origin. In spite of its lower resolving power as compared to electronic microscopy, optical microscopy has the
Chapter two: Characterization of starch granules
23
advantage of the low cost of the equipment and it is useful due to the ease of sample preparation and micrograph acquisition. Structures such as growth rings have been observed by light or optical microscopy in large starch granules from potato, banana, and wheat (Gallant, Bouchet, and Pérez, 1992; Cordenunsi, 2004). In contrast to the large granules, it is not possible to observe these rings on smaller granules such as those from rice. With the development of confocal scanning laser microscopy (CLSM) obtaining 3D high-resolution images at different depths, the use of optical microscopy allowed research advances in starch structure and starch behavior during gelatinization (van de Velde, van Riel, and Tromp, 2002). For example, observing potato starch granules in light microscopy, environmental scanning electron microscopy (ESEM), and confocal laser scanning microscopy (CLSM) makes it possible to conclude that growth ring structures in normal or high amylose starches are sharper than those observed in low amylose starches (Blennow et al., 2003). Scanning electron microscopy (SEM) is a technique with resolving power at least 10 times greater than light microscopy, whereas transmission electron microscopy (TEM) is characterized by a resolving power 1000 times greater. The first elucidative reports on starch granule architecture were TEM and SEM images of starch granules hydrolyzed by acid and enzymes, showing hydrolysis of amorphous and less crystalline regions of the granule (Gallant, Bouchet, and Pérez, 1992). Preparation of samples is very important in obtaining SEM images. For example, biological samples require a metallic coating, such as gold, to reduce the deposited charge on the sample surface. Techniques for granule setting on the sample holder can lead to artifacts during the cutting or fixing process, resulting in the misinterpretation of images. The use of water-soluble resin, which allows ultrafine cutting without sample deformation, has improved sample preparation conditions. Furthermore, the hydrophilic character of starch granules seems to preserve the granule water content (Helbert and Chanzy, 1996). Special attention should be paid in order to avoid sample damaging. A high vacuum requirement causes sample dehydration, water loss, and changes in the granular crystallinity. Recently, an environmental scanning electron microscope (ESEM) was developed with a sample chamber kept at constant pressure of 10–20 Pa during sample analysis; high vacuum is no longer required. Surface charges can be compensated by charge exchange with the environmental atmosphere and, in some cases, high-resolution images of insulating samples can be obtained with no surface coating. Sample damage can be reduced by lower accelerating potentials for the primary electron beam, and low-voltage scanning electron microscopes (LVSEM) with optimized conditions such as special electron sources, lenses, vacuum systems, and beam magnetic shielding (Pawley, 1984).
24
Starches: Characterization, Properties, and Applications
In general, starch structure and its appearance are dramatically changed by TEM or SEM preparation techniques. Nowadays, due to its high resolution power and the possibility of images without complex techniques for fixing granules, AFM is widely used to observe the surface and internal structures of starch granules.
2.2.2 Atomic force microscopy Atomic force microscopy (AFM) is a surface imaging technique that allows high-resolution images of biological samples without environmental control. This advantage and fast technical developments regarding its microscopic bases, both in hardware and operational condition reliability, allowed this technique to become popular for observation of soft samples. AFM can be operated on starch samples by contact as well as dynamic modes. In contact atomic force microscopy, the tip is kept at a distance from the surface and the net force between the sample and tip is repulsive. Attractive forces are ideal for probing biological samples because forces between atoms within such samples are small and bonds can be broken by shear forces between the sample and tip. This way, most of the different AFM microscopes are also operated in dynamic modes where tip and sample forces change periodically with time. Several modes of operation vibrating the tip close to the surface are called dynamic force microscopy (DFM) in this chapter. Dynamic force microscopy is characterized by vibrating the tip perpendicularly on the sample surface at a frequency close to the resonance frequency of the cantilever. In DFM, shear forces are minimized. Also, in one of the most used DFM modes, the cantilever is vibrated over the sample keeping the oscillation amplitude constant and the signal phase lag can be monitored, providing valuable information about the viscoelastic properties of the sample surface. As consequence, this technique can be widely used in identification of surfaces on polymeric materials. While operating in contact mode, constant distance between probe and surface can also be modulated by adding a small periodic signal to the z-piezo and the image of the force variation can provide information about local surface stiffness. However, in addition to results about surface topography, AFM also provides information about viscoelasticity and the distribution of known phases of the sample surface. By evaluating phase contrast or force modulation images it is possible to infer the presence and location of proteins in a starch granule, as well as the location, size, and shape of blocklets.
2.2.2.1 AFM sample preparation Although AFM does not require special sample preparation as already mentioned, some care must be taken concerning the granules’ surface.
Chapter two: Characterization of starch granules
25
Starch granules must be left intact and well bound to a fixed surface in order to avoid sample movements while scanning. Both the granule surface and the internal structures of the granules have already been observed by AFM and several techniques for sample fixing had been employed. Spreading starch granules over an adhesive tape fixed onto an AFM sample holder (Szymonska and Krok, 2003; Juszczak, Fortuna, and Krok, 2003a,b) and film of low-viscosity cyanoacrylate polymer (Baldwin et al., 1998) have been employed to fix starch granules. In order to avoid granule movement during scanning, starch samples have also been spread over freshly cleaved mica (Ayoub, Ohtani, and Sugiyama, 2006). Desiccation of samples can be avoided if they are deposited in substrates with a high affinity to the starch granule. Plasma treatment allows one to change and tune the surface hydrophilicity by attaching specific functional groups to it. Surfaces prepared by this technique lead to the attachment of any granular sample on solid surfaces by van der Waals forces. The main advantage is no adhesive tape is used and the AFM tip can go up and down the granule without risk of tip contamination. Oxygen plasma-modified silicon wafer surfaces were also used as a substrate to fix starch granules from mango seeds previously dispersed in water (Simão et al., 2008). Preparation of samples by encasing and molding starch granules with resins followed by a section of the sample 1.5 µm thick has been reported (Baker, Miles, and Helbert, 2001; Ridout et al., 2003, 2004, 2006). However, some resins employed in an iodine-colored sample showed a brown color, not blue, indicating that these resins promote partial degradation of amylose. Consequently, the choice of fixing resin must be made carefully in order to avoid its absorption by the starch granule. Encased air-dried starch in rapid-set resins apparently did not promote amylose degradation, preserving the granule structure from the central hilum to growth rings and leading to the possibility of clearly observing starch blocklets (Ridout et al., 2004, 2006). AFM was also used to observe gelatinized starch films as well as the conformation of isolated amylose and amylopectin. In those experiments, films were obtained by gelatinized starch poured into Petri dishes and dried at 50oC (Rindlav-Westling and Gatenholm, 2003; Thiré, Simão, and Andrade, 2003). AFM images of these films can be obtained simply by fixing them to a rigid substrate with the aid of double-sided tape. Bundles are prepared by filtration of gelatinized starch and their deposition is done on cleaved mica, allowing the use of molecular combing to stretch starch nanounit chains in mica (Zhongdong, Peng, and Kennedy, 2005).
26
Starches: Characterization, Properties, and Applications
2.3 The starch granule structure: A microscopic view One of the first published AFM images of starch granules from potato and wheat was published by Baldwin et al. (1998). Comparing the AFM images with those obtained by LVSEM, they observed nodules at the potato granule surface with size distribution ranging from 50 to 200 nm. Similar structures were also observed by SEM and AFM (Gallant, Bouchet, and Baldwin, 1997) and it was suggested that these structures could be related to blocklets constituted by the crystalline amylopectin phase. These blocklets were approximately 25 nm in size in the soft shells and 80–120 nm in the hard shells in wheat starch, with much larger ones in potato starch (200–500 nm) (Gallant, Bouchet, and Baldwin, 1997). As the samples were treated with α-amylase and prepared with colloidal gold coating and vacuum exposure, these results raised conflicting discussions regarding their reliability due to the probable starch degradation. Multiple freezing and thawing of potato starch granules followed by high-resolution noncontact AFM imaging showed internal exposition and lamellar structure of starch granules submitted to high temperatures (Szymonska and Krok, 2003). Based on these observations, two classes of lamella-forming particles were described: one smaller than 20 nm and other 40–50 nm, which they attributed to single or double amylopectin superhelical clusters bundled together into larger blocklets. Finally Ridout et al. (2003, 2004) reinforced the blocklet model by AFM imaging, observing the internal structure of pea starch granules encased in a nonpenetrating matrix of synthetic polymer. AFM has been also used to study the effect of amylose contents on starch structure. Some researchers suggest that contrast of the images arises due to selective hydration of different granular regions and softer or brighter regions occur the higher the amylose content of the blocklet composition, indicating that hard or dark bands contain no or reduced amounts of amylose (Ridout et al., 2003, 2004). Starch from peas with low amylose content had no change in the crystallinity levels, but it was not possible to visualize the blocklets inside these granules (Ridout el al., 2004, 2006). To obtain reliable AFM images it is necessary to prepare samples with relatively flat surfaces, which can be achieved by the use of sectioned or embedded granules. AFM was also employed to observe the growth rings in mango starch granules during ripening (Simão et al., 2008). Growth rings can also be clearly observed in banana starch granules as shown both in topographic as well as in phase contrast images presented in Figures2.1a and b. A clear relationship between both images is shown, but the same plateau can present different phase contrasts, as observed in the topographic image. This is clearly shown in Figure2.1c, where topography and phase contrast line profiles are compared.
Chapter two: Characterization of starch granules
27
(a)
(b)
220
–0.20
200
–0.25
180 Height (nm)
–0.30
140
–0.35
120 100
–0.40
80 60
–0.45
40 20
Phase Contrast (V)
160
500
1,000 1,500 Distance (nm) (c)
2,000
–0.50
Figure 2.1 Atomic force microscopy (AFM) image of the growth rings in a banana starch granule. The same region is presented as a topographic image (a) and as a phase contrast image (b). Both images are 2.5 × 2.5 μm2. Line profile along the diagonal of the image from the lower left corner (c).
Disorder on rice starch granule surfaces promoted by cycles of freezing and thawing was observed by DFM–AFM, showing native granules presenting protrusions of 70 nm in diameter (Ayoub, Ohtani, and Sugiyama, 2006). These results are similar to those previously obtained (Gallant, Bouchet, and Baldwin, 1997; Baldwin et al., 1998) in which protrusions of 10–50 nm were found on the surface of wheat and protrusions 200–500 nm were observed on the surface of potato starch. Depressions, hills, and pores were observed in all granular surfaces of potato, cassava, barley, corn, “waxy” corn, and wheat starch by noncontact AFM (Juszczak, Fortuna, and Krok, 2003a,b).
28
Starches: Characterization, Properties, and Applications
Observation of the internal structure of the rice starch granule submitted to a plasticizing/lyophilization cycle shows important changes in surface morphology (Ayoub, Ohtani, and Sugiyama, 2006). After two cycles of plasticizing/lyophilization using glycerol, a loosely packed array of 35 nm protrusions was observed, indicating that the process induced the disruption of the crystalline structure of the native starch grains. Observation by TEM shows that, in early stages of retrogradation, amylose is in a coiled or partly organized conformation. Helices interact forming semicrystalline aggregates separated by amorphous regions. However, amylopectin forms different structures from the ones observed in amylose samples. No significant difference is observed in structure morphology during the early stages of retrogradation, but afterwards the extended chain network forms a fractal-like network joined by an α(1–6) link (Putaux, Buléon, and Chanzy, 2000).
2.4 Starch gelatinization observed by atomic force microscopy It is well established that starch granules are insoluble in cold water but can undergo significant and irreversible changes upon wet heating. The study of the physical properties and rheological behavior of starch gelatinization is essential for understanding starch structure and supporting its application. Images from gelatinized starch by DFM–AFM can show film morphology, displaying the differences between partial and complete starch gelatinization (Thiré, Simão, and Andrade, 2003). In this case, a vibrating amplitude higher than 100 nm is employed to ensure that the tip would get into and out of the contamination layer, lowering the shear forces during scanning. Figure2.2a shows the film morphology from partially gelatinized starch, displaying swollen granules in a continuous matrix. In addition to imaging, AFM allows a detailed description of the surface features with a tridimensional visualization and clear observation of differences between partially and completely gelatinized corn starch, as observed in Figures2.2a and b, respectively (Thiré, Simão, and Andrade, 2003). The presence of ghost granules is not observed on films prepared under 90 minutes of gelatinization, indicating that the granular structure was completely disrupted (Figures2.2b and d). Protrusions of 15 to 35 nm on the superficial layer of starch films were identified as proteins of 60 kDa (Rindlav-Westling and Gatenholm, 2003) and it was suggested that they may be the starch synthase enzyme, which would migrate to the surface resulting in a protein-rich thin layer over the starch film.
Chapter two: Characterization of starch granules
(a)
29
(b) 321 nm 161 nm 0 nm 14.72 µm
1645 nm 823 nm 0 nm 18.33 µm
7.36 µm
9.17 µm 14.72 µm
18.33 µm 9.17 µm
7.36 µm
(c)
0 µm 0 µm
(d)
0 µm 0 µm
Figure 2.2 (a) AFM topographic image of a partially gelatinized corn starch film; (b) AFM topographic image of a fully gelatinized corn starch film; (c) detail of (a) presenting a tridimensional representation of one granule; (d) detail of (b) presenting a tridimensional representation of the disrupted granule. Images in (a) and (b) are 100 × 100 µm2 in area.
Because crystalline areas on the film surface and phase separation between amylopectin and amylose were also observed (Rindlav-Westling and Gatenholm, 2003), it is possible to obtain some hints about the wide range of analytical possibilities of AFM on the characterization of starchbased materials. The structure of amylose and amylopectin aggregation on gelatinized starch from potato and rice was also observed by AFM (Dang, Braet, and Copeland, 2006), indicating that, in potato starch, amylose forms aggregates probably during retrodegradation, whereas amylopectin chains show an open extended form. Different aggregation of amylose was observed on rice starch and amylopectin presented some crystalline structures even after partial gelatinization (Dang, Braet, and Copeland, 2006). With AFM observation it was also possible to conclude that starch granule swelling and rupture during the gelatinization process occur initially due to molecules flowing out of the granule in a densely packed chain (Peng, Zhongdong, and Kennedy, 2007). When the amylose and amylopectin chains are in contact with hot water, swelling takes place and the structure becomes loosely packed in amorphous areas, suggesting
30
Starches: Characterization, Properties, and Applications
that blocklets are made of twists or distortions of nanochains (Peng, Zhongdong, and Kennedy 2007).
2.5 Final remarks Although starch is one the most abundant and studied natural polymers, there are still many doubts about its arrangement and granule structure. Starch supramolecular structure defines its functional properties, being a characteristic of botanic origin. Microscopic techniques are important tools in starch characterization and they can also provide valuable information about starch degradation during fruit ripening and acid or enzymatic hydrolysis. The first research observing starch granules by optical microscopic indicated the growth of concentric circles, which are supposed to be directly related to crystalline and semicrystalline rings. Nowadays a comprehensive model of starch granule architecture has gathered hypotheses and data regarding starch structure and behavior. The blocklet theory of densely packed nanometric ordered structures on the starch granule is still under discussion, in addition to evidence provided by SEM and AFM. Several researchers have employed microscopic techniques to observe blocklet location and size, both inside and on the granule surface. Blocklet distribution along the crystalline and semicrystalline rings was successfully modeled based on AFM images. Although microscopy methods have made important contributions to elucidating granule supramolecular structure, the proposed blocklets’ internal structure (Gallant, Bouchet and Baldwin, 1997) could not be observed by any of the applied microscopic techniques. On the other hand, further information about granule arrangement and retrogradation of amylose and amylopectin can be obtained by observing starch gelatinization samples. These studies can lead to a better understanding of the chains’ release process during gelatinization and also provide support for research focused on developing starch-based materials. The main challenge faced by the different microscopy techniques in starch research remains undamaged sample preparation. One of the advantages of AFM is that it does not require special sample preparation and it can be accomplished without a strict analysis environment. Furthermore, AFM can provide details about amylose and amylopectin arrangement, contributing to advances in starch granule structure knowledge.
References Ayoub, A., Ohtani, T., and Sugiyama, S. 2006. Atomic force microscopy investigation of disorder process on rice starch granule surface. Starch. 58:475–479.
Chapter two: Characterization of starch granules
31
Baker, A.A., Miles, M.J., and Helbert, W. 2001. Internal structure of the starch granule revealed by AFM. Carbohydrate Polym. 330:249–356. Baldwin, P.M., Adler, J., Davies, M.C., and Melia, C.D. 1998. High resolution imaging of starch granule surfaces by atomic force microscopy. J. Cereal Sci. 27:255–265. Blennow, A., Hansen, M., Schulz, A., Jorgensen, K., Donald, A.M., and Sanderson, J. 2003. The molecular deposition of transgenically modified starch in the starch granule as imaged by functional microscopy. J. Struct. Biol. 143:229–241. Cordenunsi, B.R. 2004. Aspectos químicos, bioquímicos e ultraestruturais do grânulo de amido durante o amadurecimento da banana, thesis, FCF/USP, São Paulo, Brazil. Dang, J.M.C., Braet, F., and Copeland, L. 2006. Nanostructure analysis of starch components by atomic force microscopy. J. Microsc. 224:181–186. Gallant, D., Bouchet, B., and Baldwin, P.M. 1997. Microscopy of starch: Evidence of a new level of granule organization. Carbohydrate Polym. 32:177–191. Gallant, D., Bouchet, B., and Pérez, S. 1992. Physical characteristics of starch granules and susceptibility to enzymatic degradation. Euro. J. Clin. Nutr. 46:S3–S16. Helbert, W. and Chanzy, H. 1996. The ultrastructure of starch from ultrathin sectioning in melamine resin. Starch/Stärke. 48:185–188. Juszczack, L., Fortuna, T., and Krok, F. 2003a. Non-contact atomic force microscopy of starch granules surface. Part I. Potato and tapioca starches. Starch/ Stärke. 55:1–7. Juszczack, L., Fortuna, T., and Krok, F. 2003b. Non-contact atomic force microscopy of starch granules surface. Part II. Selected cereal starches. Starch/Stärke. 55:8–12. Kossmann, J. and Lloyd, J. 2000. Understanding and influencing starch biochemistry. Crit. Rev. Plant Sci. 19:171–226. Lindeboon, N., Chang, P.R., and Tyler, R.T. 2004. Analytical, biochemical and physicochemical aspects of starch granule size, with emphasis on small granule starches: A review. Starch/Stärke. 56:89–99. Pawley, J. 1984. Low voltage scanning electron microscopy. J. Microscopy 136:45–68. Peng, L., Zhongdong, L., and Kennedy, J.F. 2007. The study of starch nano-unit chains in the gelatinization process. Carbohydrate Polym. 68:360–366. Putaux, J.-L., Buléon, A., and Chanzy, H. 2000. Network formation in dilute Amylose and Amylopectin studied by TEM. Macromolecules. 33:6416–6422. Ridout, M.J., Parker, M.L., Hedley, C.L., Bogracheva, T.Y., and Morris, V. 2003. Atomic force microscopy of pea starch granules: Granule architecture of wildtype parent, r and rb single mutants, and the rrb double mutant. Carbohydrate Res. 338:2135–2147. Ridout, M.J., Parker, M.L., Hedley, C.L., Bogracheva, T.Y., and Morris, V. 2004. Atomic force microscopy of pea starch: Origins of image contrast. Biomacromolecules. 5:1519–1527. Ridout, M.J., Parker, M.L., Hedley, C.L., Bogracheva, T.Y., and Morris, V. 2006. Atomic force microscopy of pea starch: Granule architecture of the rug3-a, rug4-b, rug5-a and lam-c mutants. Carbohydrate Res. 65:64–74. Rindlav-Westling, A. and Gatenholm, P. 2003. Surface composition and morphology of starch, amylose, and amylopectin films. Biomacromolecules. 4:166–172.
32
Starches: Characterization, Properties, and Applications
Simão, R.A., Fioravante, A.P., Peroni, F.H.G., Nascimento, J.R.O., Louro, R.P., Lajolo, F.M., and Cordenunsi, B.R. 2008. Mango starch degradation I: A microscopical view of the granule during ripening. J. Agric. Food Chem. 56:7410–7415. Szymonska, J. and Krok, F. 2003. Potato starch granule nanostructure studied by high resolution non-contact AFM. Int. J. Biol. Macromol. 33:1–7. Tang, H., Mitsunaga, T., and Kawamura, Y. 2006. Molecular arrangement in blocklets and starch granule architecture. Carbohydrate Polym. 63:555–560. Tester, R.F., Karkalas, J., and Qi, X. 2004. Starch: Composition, fine structure and architecture. J. Cer. Sci. 39:151–154. Thiré, R.M.S.M., Simão, R.A., and Andrade, C.T. 2003. High resolution imaging of the microstructure of maize starch films. Carbohydrate Polym. 54:149–158. van de Velde, F., van Riel, J., and Tromp, R.H. 2002. Visualization of starch granule morphologies using confocal scanning laser microscopy (CSLM). J. Sci. Food Agric. 82:1528–1536. Zhongdong, L., Peng, L., and Kennedy, J.F. 2005. The technology of molecular manipulation and modification assisted by microwaves as applied to starch granules. Carbohydrate Polym. 61:374–378.
chapter three
Starch macromolecular structure Luis Arturo Bello-Perez, Sandra Leticia Rodriguez-Ambriz, Mirna Maria Sanchez-Rivera, and Edith Agama-Acevedo Centro de Desarrollo de Productos Bióticos del IPN
Contents 3.1 Introduction.............................................................................................. 33 3.1.1 Starch structure............................................................................ 33 3.1.2 Starch components in starch granules...................................... 34 3.2 Starch structure characterization techniques...................................... 36 3.2.1 Solubilization................................................................................ 36 3.2.2 Gel filtration chromatography................................................... 40 3.2.3 Traditional light scattering (LS)................................................. 41 3.2.4 High-performance size-exclusion chromatography (HPSEC)......................................................................................... 44 3.2.5 Sedimentation field flow fractionation with MALLS-RI........ 46 3.3 Analyzing starch structure.................................................................... 47 3.3.1 Amylose and amylopectin fractionating.................................. 47 3.3.2 Amylose structure....................................................................... 49 3.3.3 Amylopectin structure................................................................ 50 3.4 Final remarks............................................................................................ 53 References........................................................................................................... 53
3.1 Introduction 3.1.1 Starch structure Starch granular organization as well as amylose and amylopectin structure depend on the botanical source. Amylose, the linear D-glucose chain, has on average between 500 and 6,000 glucose units that are distributed among 1 to 20 chains. Each chain has shown an average degree of polymerization (DP) of 500. Some spaced branching points were detected in amylose, however, it presents lineal polymer characteristics. The properties of amylose might be explained as its diverse molecular conformations. For example, in neutral solutions the conformation is a random coil. 33
34
Starches: Characterization, Properties, and Applications
However, other conformations were reported such as an interrupted helix or deformed helix. Amylopectin, the branching polymer of starch, contains short (DP = 20–25) chains linked to the α–D–(1–6) linkages on the main chain. Studies of the structure of amylopectin showed substantial progress in 1937, with the Haworth hypothesis about the laminated structure of starch (Hood, 1982). In the same year, Staundiger and Husemann suggested the amylopectin structure would be a main chain branched with all branched joined chains. In 1940, based on chemical analysis determining the reduction sugars, Meyer and Bernfeld proposed a model based on random branching and, in 1949, Myrback and Sillen mentioned that the models cited above had different arrangements of the same chains (Hood, 1982). In 1952, Peat proposed the terminology of A-, B-, and C- to designate different chains on the amylopectin structure (Hood, 1982), where the A-chain is joined to the molecule by a reduction end, the B-chain bonds to the A-chain but is also joined to other A- or B-chains at one or more primary hydroxyl groups, and the C-chain is not substituted in the reduction end, being unique to the amylopectin molecule (Greenwood, 1976). This nomenclature was proposed in order to facilitate the comparison of amylopectin models when the chain length is unknown. The A-, B-, and C- terminology led to some mistakes in interpretation of studies about amylopectin structure, therefore using the degree of polymerization (DP) of the chains to describe amylopectin structure was suggested. Important advances in studies of amylopectin were done by debranching its structure with β-amylase and pullulanase. Robin et al. (1974) proposed the cluster model of amylopectin structure based on the model previously suggested by Nikuni and French (Nikuni, 1978). In this cluster model, the A- and B-chains are presented as linear structures with DP of 15 and 45, respectively. The B-chain is the backbone of amylopectin and extends over two or more clusters, constituted by 2 and 4 A-chains. Those clusters of associated A-chains are responsible for the crystalline regions of starch granules. The intercrystalline areas of the starch granule, also called amorphous areas, are present in intervals of 0.6–0.7 nm and contain the highest amount of α–D–(1–6) linkages, being very susceptible to hydrolysis by acids and enzymes such as pullulanase, isoamylase, and amyloglucosidase. In general, the amylopectin molecule is 1.0–1.5 nm in diameter and 12–40 nm in length.
3.1.2 Starch components in starch granules There is some controversy as to how amylose and amylopectin are packed in starch granules. Biliaderis (1992) proposed the organization of starch components with lipids in the starch granule, whereas amylopectin, and perhaps amylose, are radially oriented toward the granular surface. In this model, the crystallinity of starch is attributed to linear short chains
Chapter three: Starch macromolecular structure
35
presented in the amylopectin molecules (DP 14–20) and arrangement of these chains is reponsible for the three-dimensional crystalline structure. The three-dimensional structural features of native starch granules can be shown in x-ray diffraction patterns, which are classified as A- or B-type (Imberty et al., 1987; Imberty and Perez, 1988). In the crystalline A starch model, the structure is based on parallel-stranded double helices in the unit cell, and it produces a monoclinic crystal. The model of crystalline B starch is produced by a hexagonal arrangement of the double helices (Imberty and Perez, 1988). Although the geometry of double helices is identical in the A- and B-forms, the two structures differ in the water level and crystalline arrangements (Wu and Sarko, 1978a,b). It was suggested that the amorphous zone of granular starch is also heterogeneous, consisting of amylose and intercrystalline zones of dense branching in amylopectin. Such a complex morphology plays an important role in thermal characteristics and the plasticization pattern of starch by water, which are dependent on the amorphous phase (Biliaderis, 1992). Studies using colloidal gold-labeled concanavalin A and based on specificity of lectin for the nonreducing endgroups of amylopectin, resulted in positive labeling. However, the amylopectin localization has not yet been proven; a relation was found between the intensity of labeling and abundance of ramified molecules (Gallant et al., 1992). Some evidence points to in situ monoacyl lipids on the starch granule arrangement resulting in complexes with chains (Galliard and Bowler, 1987), which are represented by a V-type x-ray diffraction pattern and small peak at 2θ = 20º. However, the amylose–lipid complex formation is not clear. It has been suggested that, when the amylose chain is in the presence of a monoacyl lipid, the amylose helix is formed and the mono acyl lipid is included in this cavity. Another hypothesis is that the double helix exists naturally and then the monoacyl lipid is deposited in the central cavity (Morrison, 1988; Tester, Karkalas, and Qi, 2004). In the starch structure model proposed by Jane et al. (1992), the most probable location of amylose is in the randomly interspersed radial chains with an increasing level of amylose toward the granule exterior. This model does not consider lipids and proteins, because their exact location and interaction with amylopectin is still not certain. Additionally, it was hypothesized that amylose may be predominantly located in the amorphous zones of the granule and the A-crystalline lattice in the starch structure formed by amylopectin (Gallant, Bouchet, and Baldwin, 1997). In native starch, amylopectin is considered as predominantly responsible for granule crystallinity, ranging from 15–45% according to botanic origin. Crystallinity is also dependent on the amylopectin chain length and chain ramification (Zobel and Stephen, 1996). The crystalline regions are formed by layers of 120–400 nm thickness, composed of crystalline and semi-crystalline lamellae, which form the granule packing (French, 1984;
36
Starches: Characterization, Properties, and Applications
Donald et al., 1997). The crystalline lamellae are believed to be ordered in double-helical amylopectin side-chain clusters and are interleaved (alternate) with more amorphous lamellae consisting of the amylopectin branching regions. It is assumed that the crystalline and amorphous lamellae of the amylopectin are organized into larger, more or less spherical structures, which have been termed “blocklets.” The blocklet diameters range from 20 to 500 nm, depending on the starch botanical source and location in the granule (Gallant, Bouchet, and Baldwin, 1997) (Figure3.1). Understanding starch structure is considered essential to obtain modified starches with target functional properties. The development of new methods of starch characterization based on molar mass, gyration and hydrodynamic radius, branching degree, and chain length distribution can contribute to the knowledge of its structure and, consequently, to its physicochemical and functional properties.
3.2 Starch structure characterization techniques 3.2.1 Solubilization Solubilization under moderate conditions, always making sure to keep the structure intact, is the first condition for studying starch structure. Starch is soluble in excess water under heating conditions whereas, depending on the temperature and the time of heating, its chains can be depolymerized. For this reason, it is necessary to find a solubilization method that does not damage the starch structure. Methods for the study of starch structure using several solubilization procedures are summarized in Table3.1. In the 1990s most starch characterization methods involved a heating step at high temperature, using a boiling water bath, autoclave, steamjet cooker, extrusion, or microwave oven. Variations were introduced to increase the solubilization level such as DMSO addition, dispersion in KOH or NaOH, a blend of DMSO–LiBr, and ultrasonication. However, in the majority of such research, the amount of soluble starch was not quantified. Actually, the major part of solubilization procedures involves pretreatment of samples with DMSO and DMSO–ethanol, after the starch dispersion is heated in a microwave oven, autoclave, boiling water bath, or jet cooker, and, in some works, an additional sonication. Starch recovery after solubilization is also an essential parameter to be considered in sample preparation for starch characterization. Of course, the longer the heating time or heating potency is, the higher the starch solubilization (Fishman and Hoagland, 1994), but the risk of sample depolymerization increases with high temperatures. A starch solubilization range between 48.9 and 71.2% can be obtained using microwave heating for 90 seconds (Fishman and Hoagland, 1994), whereas a starch solubilization range between 59 and 81% can be obtained using microwave heating
Chapter three: Starch macromolecular structure
37
Crystalline hard shell Semi-crystalline soft shell Hilum
Pores
Granule surface
Whole granule Crystalline hard shell Semi-crystalline soft shell
Large Amorphous blocklet channels
Small blocklet
Crystalline amorphous
Amylopectin clusters
Blocklet
Side view
Top view
Type A
Amylose
Lipid
Type B
Figure 3.1 Overview of starch granule structure. At the lowest level of granule organization (upper left), the alternating crystalline (hard) and semi-crystalline (soft) shells are shown (dark and light, respectively). The shells are thinner toward the granule exterior (due to increasing surface area to be added by constant growth rate) and the hilum is shown off-center. At a higher level of structure the blocklet structure is shown, in association with amorphous radial channels. Blocklet size is smaller in the semi-crystalline shells than in the crystalline shells. At the next highest level of the structure one blocklet is shown containing several amorphous crystalline lamellae. In the next diagram the starch amylopectin polymer in the lamellae is shown. The next image (from Blanshard, 1987) reminds us that amylose–lipid (and protein) feature in the organization of the amylopectin chains. At the highest level of order, the crystal structures of the starch polymers are shown (modified by Gallant et al., 1992; from Imberty et al., 1987 and Imberty and Perez, 1988).
Technique
1.1 × 102–1.2 × 106 9.0–63.2
SEC-MALLS
HPSEC-MALLS Light scattering HPSECMALLS-RI
60–334 95–340
HPSEC-MALLS
96–251
sdFFF/MALLS
121–320
0.45 × 10–7–2.2 × 10–7 0.76 × 10–7 69 × 107 29–349 × 106
DLS
44.5–89.9
SEC/MALLS
SLS
37.5–360 × 106
Autoclaving different times. Microwave 35 s
RG (nm) 165–235 170–241 19.4–60.1
7.9 × 106–2.7 × 108 110–259
340–1050 × 103
KOH
Mw (g/mol) 16.7–88.0 × 106 53.8–112 × 106 5.45– 9.6 × 106
Solubility (%)
Autoclaving
Solubility method
Microwave 87–100 different times Amaranth (starch) DMSO-microwave 83.7–100 different times Soft and hard wheat cultivars NaOH 70°C, (amylopectin) neutralized with HCl Amylose fractions KOH-water synthesized
Maize, pea, potato (starch) Maize, pea, potato (amylose) Maize, pea, potato (amylopectin) Cassava, wheat, maize, potato and pea (amylose) Potato and waxy corn (starch) Corn, 5 and 7 eurolyn (amylopectin) Maize, wheat, potato (starch)
Sample
Table3.1 Macromolecular Characteristics of Starches Reference
Roger et al. (2000)
Roger et al. (1996) Hanselmann et al. (1996) Bello-Perez et al. (1998a) Bello-Perez et al. (1998b) Bello-Perez et al. (1998c) You et al. (1999)
Aberle et al. (1994)
38 Starches: Characterization, Properties, and Applications
78.5–96.7
NaOH
2.44–6.23 × 108
295–420
81.6–150 211 83–164 214–247 406–435
83–164 214–247
195–396
201–782
300–324
SEC-MALL-RI system SEC-MALL-RI system SEC-MALL-RI system HPSECMALLS-RI
HPSEC-MALLSRI system SEC-MALL-RI system
GPC (Sepharose CL-2B gel) HPSEC-MALLSRIHPAE-ENZPAD HPSEC-MALLS system
Stevenson et al. (2006) Stevenson et al. (2007)
Han and Lim (2004b) Han et al. (2005)
Rolland-Sabate et al. (2003) Han and Lim (2004a)
Yoo and Jane (2002a)
Franco et. al. (2002)
Notes: SEC: Size exclusion chromatography; MALLS: multiangle laser light-scattering; RI: refractive index; DLS: dynamic light scattering; SLS: static light scattering; GPC: gel permeation chromatography; HPSEC: high-performance size exclusion chromatography; SdFFF: sedimentation field flow fractionation.
Jicama from Texas and Mexico (amylopectin)
1.4–3.13 × 106 197–254 × 106
78.5–100
Water bath 1 h
0.75–3.41 × 108
72.0–98.0
DMSOmicrowave 38 s DMSO, boiling 1h, and stirring 8h 2.0–2.9 × 106 46–126 × 106 1.5–3.1 197–254 4.63–11.10 × 108
1.3–56.8 × 108
DMSO
Bean, rice, canna, barley, wheat, banana, potato (amylopectin) Yam tubers, maize, wheat, potato, cassava (starch) Waxy, normal, high amylose corn (amyloses) Waxy, normal, high amylose corn (amylopectin) Corn (amylose) Corn (amylopectin) Corn (amylose) Corn (amylopectin) Apple (amylopectin)
6.1–6.97 × 1010
DMSO
Wheat (amylopectin)
Chapter three: Starch macromolecular structure 39
40
Starches: Characterization, Properties, and Applications
for 80 seconds (Fishman et al., 1996). Microwave heating for 35 seconds at 900 W promoted a starch solubilization range between 87 and 96%, without apparent structure degradation (Bello-Perez et al., 1998a). With slight modifications, this method has been used in research on starch structure from several botanical sources (Tetchi et al., 2007; Rolland-Sabate et al., 2007), where the solubilization recovery values ranged between 96.7 and 100%. Some works suggested solubilization increasing with a rise in amylose content (Fishman and Hoagland, 1994), probably due to the difficulty of amylopectin solubilization, which often results in gel remaining on the bottom of the centrifuge tube. If the solubilization is affected by the amylose contents, it seems clear that the solubilization rate changes according to the botanical source of the starch. For waxy and normal corn starches a solubilization rate between 97.5 and 100% was reported (Han, Lim, and Lim, 2005), and for rice starches the solubility was between 49.1 and 87.4% (Zhong et al., 2006), according to the solvent. However, most research on starch solubilization does not report the percentage of solubilization obtained from the original sample weighed in the experiment. It is important to note that the solubilization rate is the first step to verify whether the starch samples were completely dissolved and the success of the starch characterization depends on it.
3.2.2 Gel filtration chromatography Gel filtration or low pressure chromatography was the first technique used for the characterization of starch structure. This technique is based on the size exclusion principle, where the sample is introduced in a long column (1 m or longer; diameter between 1.25–2.54 cm), and its retention time is as short as the particles are large. After elution, sample fractions are collected and total carbohydrates and reducing sugar content are quantified. Gel filtration of hydrolyzed samples by debranching enzymes was one of the main tools in studies of starch structure. One of the first works with this approach was done by Biliaderis (1982), using elution in a Sepharose CL-2B column of debranching amylopectin from pea and waxy maize starches. It allowed the authors to identify two populations corresponding at the A- and B-chains of the cluster model. Using a similar technique (with Sepharose CL-2B and Bio-gel P–6 columns), it was possible to calculate the molecular weight of amylose from potato and normal and high-amylose corn starches, and amylopectin branch chain length from high-amylose corn, waxy corn, and normal rice starches, and also correlate its influence on paste properties of starch (Jane and Chen, 1992). Improvement of peak resolution by a gel filtration system with a long column (2 m and 1.25 cm diameter) can be obtained on evaluation of chain length distribution and
Chapter three: Starch macromolecular structure
41
degree of polymerization of debranching amylopectin (Paredes-Lopez, Bello-Perez, and Lopez, 1994). Reports of chain length distribution of amylopectin are shown in Table 3.1, obtained from different gels, elution rates, solvents, and temperatures. Unfortunately, gel filtration chromatography needs a long time to run the samples (approximately 12–15 hours per sample), careful gel preparation in the column to avoid trouble with fissures and/or bubbles which cause low resolution, and a large number of samples to allow total carbohydrate quantification.
3.2.3 Traditional light scattering (LS) Light-scattering equipment has been used for the past 30 years in structural and molecular characterization of polymers. This technique was established after Debye (1947) introduced the theoretical concepts, contributing significantly to the elucidation of the macromolecule structure and allowing direct measurement of the molecular weight and size. Information about polymer structure can be obtained from the full curve of the particle scattering factor (Hanselmann et al., 1996; Burchard, 1997; Bello-Perez, Roger, and Paredes-Lopez, 1998) and special attention has been given to the thermodynamic properties of solutions on molar mass and mean square radius of gyration. Light-scattering measurements can be done by static or dynamic light scattering. The information obtained by the lightscattering technique is useful in understanding the polymer structural changes in specific systems and to explain their behavioral functionality, such as in semi-dilute solutions (Galinsky and Burchard, 1996) and their angular dependence on static (Galinsky and Burchard, 1997a) and dynamic (Galinsky and Burchard, 1997b) light scattering. With static light scattering, molar mass and gyration radius (Rg) are calculated by root mean square distance of the scattering elements (as monomeric units or chain segments) from the center of mass. On dynamic light scattering, the hydrodynamic radius (Rh) is obtained from the translational diffusion coefficient (D) using the Stokes–Einstein relationship (Burchard, 1993). Also, by dynamic light scattering measurement, virial coefficient A2 (which characterizes the interactions between polymers and solvent) and the intrinsic viscosity (η) are based on the ratio of volume to molecular weight (Mw) (Galinsky and Burchard, 1995, 1997b; Han, Lim, and Lim, 2005). Information about internal structure and flexibility can also be obtained by light scattering (Burchard 1997; Galinsky and Burchard, 1997a,b). An intrinsic feature of the polymer–solvent system, which results from the conformation of polysaccharide in solution, can be determined by the structural ρ-factor (which is the ratio of the two radii; Rg/Rh = ρ) or by the molecular weight ratio of the two mentioned radii (Roger et al., 1996). Several ρ values for different molecular architectures of polymers
42
Starches: Characterization, Properties, and Applications
were reported (Burchard, 1992), with the high ratio (ρ > 2.0) the consequence of a rigid rod architecture polymeric, and the low ratio (ρ = 0.778) the hom*ogeneous sphere architecture. The light-scattering technique has been also used to evaluate structural characteristics of depolymerized starches. It allows the comparison of conformational structures considering ABC monomers of polycondensation models, which denote different functional groups on polymer structure (Burchard, 1972). As previously noted, the sample preparation heating treatment has a strong influence on starch structure results. For example, using different heating times in sample preparation, Bello-Perez et al. (1998c) obtained amylopectin from amaranth starch with Mw of 69 × 107 g/mol when heated in a microwave oven for 35 seconds and Mw of 7.6 × 106 g/mol when heated for 90 seconds, with Rg and Rh values between 334 nm (35 seconds) and 114 nm (90 seconds), and between 273 nm (35 seconds) and 130 nm (90 seconds), respectively. Data from Kratky plots, fractal dimensions, and relaxation rate dependence on q obtained by static and dynamic light scattering showed significant differences in internal structure and amylose content, according to the heating treatment (Roger, Bello-Perez, and Colonna, 1999). Comparing dilute aqueous solutions of starches from maize and pea analyzed by static light scattering, it is possible to conclude that starches with high amylose content (amylomaize) present different angular dependences from those with high amylopectin content (waxy). In this case, the molar mass for amylopectin ranged between 60.9 and 112.2 × 106 g/ mol with Rg between 170.8 and 241.5 nm and for amylose the molar mass ranged between 2.09 and 19.6 ×106 g/mol) with low Rg (between 19.4 and 60.1 nm), giving evidence of a pronounced aggregation of amylose chains (Aberle et al., 1994). The Zimm plot does not allow a sufficiently accurate extrapolation to a zero scattering angle (q2 = 0), therefore it has also been proposed to obtain the molar mass and gyration radius of total starch, amylose, and amylopectin using a Berry plot. The differences between the diverse starch structures can be particularly perceptible in the Kratky plots, where the particle-scattering factor (Pq) is plotted as u2 Pq versus u. In this kind of diagram, the asymptotic region at high u values is accomplished with increasing the molecular weight. Therefore, even a small change in the particle-scattering factor in the u domain, which is related to the internal structure, can be detected (Aberle et al., 1994). In sample preparation, both static and dynamic light scattering are used to study the stability in water of starch dispersion after solubilization in a microwave oven. In general, the Mw, Rg, and Rh values decrease when storage time increases, probably because of the increase of starch depolymerization during storage. However, samples with a high amylose level (50 and 70% of amylose) stored over 72 hours decrease; this pattern
Chapter three: Starch macromolecular structure
43
can be due to retrogradation (Bello-Perez et al., 1998a). The fractal dimension and branching level of amylopectin can be estimated by treatment of Rg–Mw data. Kratky plots (where the internal structure might be predicted) can also show depolymerization during storage time (Bello-Perez et al., 1998b). Amylopectin content is the major parameter governing the behavior of starches in solution; the contribution of amylose becomes noticeable when the weight fraction exceeds 0.5 (50% of amylose in the starch) (Roger, Bello-Perez, and Colonna, 1999). Using static light scattering with the Zimm plot fit, Mw and Rg of amyloses from potato starch ranged between 1.08 and 9.42 × 105, and 24 and 71 nm, respectively (Radosta, Haberer, and Vorwerg, 2001). In this case, the second virial coefficient (A2) was positive and relatively large, indicating that DMSO is a good solvent for amylose. However, synthetic amyloses and transgenic potato starches with different amylose evaluated by Berry plot showed Mw and Rg ranged between 1.08 and 9.42 × 105 g/ mol, and between 24 and 71 nm, respectively. However, no significant differences in the Mw or Rg of the transgenic and traditional potato starches were observed (Radosta, Haberer, and Vorwerg, 2001). Using the same principle of light scattering, a multiangle laser light scattering (MALLS) detector was designed to couple with a chromatographic system (e.g., high-performance liquid chromatography) and measure the intensity of the scattered light emitted by the molecules present in the sample at different scattering angles. Consequently, it is possible to monitor the scattering continuously by means of several detectors mounted at different angles (Thielking and Kulicke, 1996). Each particle-scattering function corresponds to a fraction of the population distribution, which contains a polymer fraction of low polydispersity. In this detection, the distribution of starch fractions can be quantitatively evaluated by scattered light and angular dependence, defined by the particle-scattering factor P(q), and it can also provide details about the fractions’ molar mass (Hanselmann et al., 1996). The light-scattering detector can be used in microbatch mode wherein the constituents in solution are measured together. The molecular characterization of amylopectin from wheat by microbatch mode of the MALLS, showed Mw ranged from 29 × 106 to 349 × 106 g/mol and the Rg between 122 and 340 nm, obtained by Berry plot with a third-order polynomial fit (You, Fiedorowicz, and Lim, 1999). As expected, solubilization of samples must be done under suitable conditions, considering time and temperature. With nonconventional starches (banana, mango, and okenia) solubilized at different times in a microwave oven using the microbatch mode, longer heating time resulted in a decrease of Mw and Rg due to depolymerization of amylopectin (Millan-Testa et al., 2005).
44
Starches: Characterization, Properties, and Applications
3.2.4 High-performance size-exclusion chromatography (HPSEC) Separation of polymers by HPSEC is done on the basis of their effective diameter and molecular weight (Jackson et al., 1988). First, research using HPSEC on polymers described a refractive index detector (RI), two Zorbax columns (Kobayashi, Schwartz, and Lineback, 1986), and four Shodex columns (Jackson et al., 1988). Later, Bondagel columns in series coupled to RI (Yuan, Thompson, and Boyer, 1993) and intrinsic viscosity detectors (Fishman and Hoagland, 1994) were employed. The advantage of HPSEC is the shorter time (30–60 minutes/sample) than gel filtration (12–16 hours) and better resolution. In HPSEC analysis, standards of molar mass such as dextran and pullulan are required as parameters to evaluate the molecular structure and molar mass of samples. In systems coupled with a multiangle (MALLS) detector carrying out a scan, the dynamic behavior of the molecule in solution gives information about the molar mass, gyration radii, and second virial coefficient. A mathematical fit adjusted according to Berry (Figure3.2), Zimm, or Debye is applied to determine the above-mentioned parameters. The HPLC-MALLS-RI system is widely employed to relate the structural characteristics of starches to new varieties (Yoo and Jane 2002b; Chiou et al., 2005), native or modified starches (Yoo and Jane, 2002a; Millan-Testa et al., 2005; Stevenson, Domoto, and Jane, 2006; Stevenson, Jane, and Inglett, 2007) (Figures3.3 and 3.4), and their functional properties (Table3.1).
Sqrt (K*c/R (theta))
3.0 × 10–4 2.5 × 10–4 2.0 × 10–4 1.5 × 10–4 1.0 × 10–4
0.0
0.5
1.0 Sin2(theta/2) + Kc
1.5
Figure 3.2 Berry plot of barley starch dissolved 50 s in microwave analyzed with the microbatch mode of the MALLS detector.
Chapter three: Starch macromolecular structure
45
0.030
RI Response (Volts)
I 0.020
III
0.010
IV
II
0.000
10.0
9.0
11.0 12.0 Elution Volume (mL)
13.0
14.0
Figure 3.3 HPSEC profiles of starch from amylose of maize treated with DMSO (I), amylopectin maize (II), normal maize (III), and Eurylon 7 starch (IV) (BelloPerez et al., 1998a).
7 6
RI Response
5 1.5%
4 3
3%
2 Unmodified
1 0
11
13
15
17
19
21
23
25
Retention Time (min)
Figure 3.4 Normalized high-performance size-exclusion chromatographs of unmodified and oxidized starches (1.5 and 3% active chlorine).
46
Starches: Characterization, Properties, and Applications
3.2.5 Sedimentation field flow fractionation with MALLS-RI Traditionally, the molar mass and its distribution have been determined by high-performance size-exclusion chromatography in combination with MALLS and RI. With the advances in sedimentation flow field-flow fractionation (SdFFF) it is possible to fractionate molecules according to diffusion coefficients, which can be empirically related to their molar mass (Thielking and Kulicke, 1996). In the SdFFF method, particle separation is done according to hydrodynamic volume and density, induced by a gravitational field oriented perpendicular to the flow direction. A combination of online light-scattering detection with this fractionation method allows the determination of the molar mass and the radius of gyration in each eluted fraction (Hanselmann et al., 1996), providing information about the structural properties of amylopectin and its relative molecular weight (Roger, Bello-Perez, and Colonna, 1999). This technique has been also used to evaluate the performance of sample preparation conditions. For example, starch from waxy corn treated at 20 minutes of heating showed the Mw of 3.6 × 106 Da, with the Rg of 320 nm (Hanselmann et al., 1996). The SdFFF-MALLS-RI system has been also used in research to evaluate the amylose/amylopectin ratio in starches; molar mass of 4.5 × 108 g/mol and 3.2 × 107 g/mol, with Rg value of 334 and 112 nm, respectively, were obtained for waxy and normal starches (Roger, Baud, and Colonna, 2001). In analysis using SdFFF separation, Mw and Rg showed dependence with the cross-flow in normal and waxy barley starches. For normal barley starch Mw ranged between 133 and 1.9 × 106 g/mol and Rg between 183 and 123 nm, and for waxy starch Mw was between 187 and 216 × 106 g/mol, and Rg between 197 and 270 nm. Amylose from normal starch presented Mw of 2.3 × 106 g/ mol and Rg of 107 nm, whereas amylopectin has Mw 280 × 106 and Rg 260 nm and amylopectin from waxy starch has Mw 360 × 106 g/mol and Rg of 267 nm (You et al., 2002). Using this technique, it was also possible to observe in jet-cooked amylopectin from cationic potato the decrease of Mw from 34 to 2.6 × 107 g/mol and Rg values from 380 to 90 nm when jetcooking temperature was raised from 110 to 140ºC (Moding, Nilson, and Wahlund, 2006). The SdFFF-MALLS-RI system also yields information about starch structure and its conformation. Using Kratky plots, Moding, Nilson, and Wahlund (2006) showed that, at low ionic strength, starch behaves as a flexible chain with a high degree of branching and, that with increasing ionic strength, it shows a more compact internal structure. Differences in internal and global amylopectin structure according to botanical origin can also be observed by the SdFFF-MALLS-RI system; waxy wheat starch appeared to show the most hom*ogeneous structure, whereas normal
Chapter three: Starch macromolecular structure
47
maize and cassava amylopectin showed the most heterogeneous one (Rolland-Sabate et al., 2007). Whatever method is used, chromatography is the most often employed technique to characterize starch structure. However, the choice of method is a function of the sample’s nature, parameters to be evaluated, and experimental conditions. Some of the main advantages and disadvantages of chromatography methods used in starch characterization are reported in Table3.2.
3.3 Analyzing starch structure 3.3.1 Amylose and amylopectin fractionating Fractionation of amylose and amylopectin is one of the most important steps in the characterization of starch structure. Often, Schoch’s (1964) traditional method of starch fractionation is used with slight modification according to the amylose/amylopectin ratio. In high amylose starch fractionation, a 90% DMSO solution is used to solubilize the samples, followed by precipitation in methyl alcohol, redissolution in distilled water, and filtration to remove insoluble material. In this method, the pH solution is adjusted with phosphate buffer and starch samples are autoclaved (121ºC for 3 hours) and stirred in a water bath (96ºC) for 2 hours to disperse starch molecules. n-Butyl alcohol is used to form an amylose–butyl–alcohol complex, which is recovered by centrifugation followed by amylose purification (Wang and White, 1994). The amylopectin remaining in the supernatant is concentrated by evaporation and then treated twice with n-butyl alcohol and methyl alcohol to remove amylose residues (Jane and Chen, 1992). The method proposed by Banks and Greenwood (1967) using thymol and butanol amylose complexation is often used on starches from cassava, amaranth, potato, wheat, normal maize, and smooth-seeded peas. Amylopectin from amaranth isolated with the method proposed by Banks and Greewood (1967) and evaluated by HPSEC-MALLS-RI was considered of high purity with molar mass of 108 g/mol (Paredes-Lopez, Bello-Perez, and Lopez, 1994; Bello-Perez et al., 1996a, 1998c). However, Roger and Colonna (1993) found the presence of large aggregates of amylopectin in purified amylose solution, suggesting additional ultracentrifugation steps to remove them (Roger et al., 1996). On cereal starches (wheat and maize), modification of the thymol and butanol method with further purification steps with ultracentrifuge at 10,000 g for 1 hour and prewarming at 40°C was also suggested by Takeda, Hizukuri, and Juliano (1986). Other techniques of amylose and amylopectin fractionation are carried out by gel filtration chromatography. However, after fractionation
48
Starches: Characterization, Properties, and Applications
Table3.2 Advantages and Disadvantages of Different Separation Methods Methods
Advantage/disadvantage
Gel filtration chromatography
• Separation involves tedious fraction collection and chemical analysis that requires at least one day per sample to complete. The time required limits the number and type of samples that can be analyzed. • Fractionation can be obtained between 8–10 h. • Each collected fraction is analyzed for total carbohydrate and blue value. Measured absorbance spectrophotometric. • Carbohydrate assays can be laborious, time-consuming, and susceptible to errors. Some chemicals used are hazardous. • Risk of starch degradation and retrogradation. Temperature variation. • Separation in much shorter times than conventional chromatography. • Separation based on effective diameter and molecular weight. • Molecular degradation could occur due to the pressure, shear, and friction prevailing in the column. • Starch Mw standards are not available. • Pullulan and dextran calibration standards are used to simulate starch, but this determination is relative; the molecular structure of the standards used must be close to the polymer studied with molecular weight in same range. • Calibration method for GPC (log Mw vs. retention volume) has serious limitations in application to samples that are different from the polymers employed as standards. • Reliable narrow distribution standards are available for only very few polymer materials. • Standards of one polymer do not behave in solution in the same manner as another polymer. • Large apparatus occupies considerable space. • Separate SLS and DLS detectors required to analyze the samples. • Many disposable materials required for each sample to avoid signal interference. • Manual change to angle possession for measurements. • Very laborious to process the data. • The time required is approximately 2 hours to run each sample.
HPSEC-RI
Traditional light scattering
Chapter three: Starch macromolecular structure
49
Table3.2 Advantages and Disadvantages of Different Separation Methods (Continued) Methods HPSECMALLS-RI
SdFFF-MALLS-RI
Advantage/disadvantage • Rapid method to separate and monitor starch components and debranched fragments. • Molecular parameters absolute and obtained directly without calibration standards. • Small samples (10 µg/mg) can be analyzed in a short time with less day-to-day variation than traditional techniques. • Measurement of many samples in a short time. • The most descriptive method because it relies on the motion or dynamics of the scatters. • Molecular parameters obtained directly without calibration standards. • Separate molecules according to their diffusion coefficients, which can be empirically related to their molar mass.
Sources: Ong et al. (1994); Kobayashi et al. (1986); Roger and Colonna (1993); Batey and Curtin (1996); Timpa (1991); Jackson et al. (1988); Hanselmann et al. (1996); Han et al. (2005); Thielking and Kulicke (1996).
with Schoch (1942) and Banks and Greenwood (1967) methods, gel filtration chromatography can be used to evaluate the purity of both macromolecules (Jane and Chen, 1992). Then, the separated fractions containing the amylopectin and amylose can be pooled, concentrated, and freezedried.
3.3.2 Amylose structure Research on amylase structure has been carried out using HPSEC coupled with two detectors: multiangle laser light scattering and refractive index. Amylose powders isolated from starches with diverse botanical origins (cassava, potato, wheat, normal maize, and smooth-seeded peas) by the thymol and n-butanol complexation method, dispersed in 1 M KOH and diluted in 0.1 M KOH, have been characterized by combined systems of size-exclusion chromatography and MALLS (Roger and Colonna, 1993). In this method, pullulan and dextran commercial standards are used to assess the validity of the HPSEC-MALLS experiments and a semi-logarithmic plot of Mw versus elution volume at the maximum of the RI peak as the reference. For the same elution volume (i.e., hydrodynamic size), the branched polymer exhibits a higher Mw than the linear one due to the higher density compactness, leading to some conclusions about the sample structure. By this method, it was possible to conclude
50
Starches: Characterization, Properties, and Applications
that amylose from cassava and wheat presented a higher average molar mass (1.2 and 1.1 × 106 g/mol, respectively) than commercial amylose (4 ×105 g/mol) (Roger and Colonna, 1993), whereas Takeda, sh*taozono, and Hizukuri (1988) reported Mw 4 × 105 g/mol for amylose from corn starch. However, decrease of Mw in amylose from cassava starch from 1.2 × 106 g/mol to 1.05 × 106 g/mol after ultracentrifugation allowed Roger and Colonna (1993) to conclude that large aggregates eluted at low elution volume often cause contamination of the amylose solution in the amylopectin fraction, which can be reduced by ultracentrifugation (Roger et al., 1996). SLS and HPSEC-MALLS-RI systems are also employed in starch structure characterization. Both were used to studied amyloses synthesized by phosphorylase from malto oligomers as the primer and glucose-1-phosphate as the substrate, where the Mw ranged between 1.3 × 105 and 1.0 × 106 g/mol and Rg was between 24 and 71 nm. Synthetic amyloses show a broader unimodal molar mass distribution, with a polydispersity similar to that obtained from native starch (Radosta, Haberer, and Vorwerg, 2001). However, the parameter most commonly used to evaluate amylose structure is the molecular weight and dynamic behavior in solution. Using SLS and HPSEC-MALLS-RI systems, Mw values of amylose from three cultivars of rice starch ranged from 3.12 and 3.44 × 106 g/mol with Rg between 86 and 103.3 nm (Zhong et al. 2006). These systems have also been employed to study the impact of temperature on the amylose structure during its fractionating. Pea starch, which has a high amylose content, showed that Mw (15.7 and 18.5 × 106 g/mol) and recovery percentage of amylose increase as isolation temperature rises (Vorwerg, Radosta, and Leibnitz, 2002).
3.3.3 Amylopectin structure Amylopectin is a large molecule (107 and 108 Da) with a high branching degree (Hanselmann et al., 1996). Several authors agree that the chain length distribution and the molar or weight ratio of amylopectin play an important role in starch functional properties. It has been suggested that, in some products elaborated with wheat starch, amylopectin fraction would be the main factor responsible for functional characteristics of the final product (Kobayashi, Schwartz, and Lineback, 1986). For example, amylopectin from three corn starches (amylose content of 36, 41, and 59%) with different proportions of short (DP 17–22) and long (DP 99–110) chains (Takeda, Takeda, and Hizukuri, 1993) present different gelatinization behavior. In amylopectin, the higher the proportion of short chains, the lower the gelatinization temperature is (Jane et al., 1999). Conversely, the amylopectin with a high level of long branching chains
Chapter three: Starch macromolecular structure
51
presents a high gelatinization temperature and a strong tendency to retrogradation (Jane et al., 1999; Chang and Lin, 2007). As with amylose, amylopectin structure is usually evaluated by chromatographic methods. The first structural studies of the chain length distribution of amylopectin were carried out using gel filtration chromatography (Bio-Gel P-10, 100–200 mesh, Sepharose CL-2B) by debranching the chains with isoamylase or pullulanase (Biliaderis, Grant, and Vose, 1981; Biliaderis, 1982; Hizukuri, 1986; Paredes-Lopez, Bello-Perez, and Lopez, 1994). The debranched components of starch were determined by the total sugar and reducing endgroup content (Dubois et al., 1956; Ong et al., 1994). The average degree of polymerization of the eluted fraction can be determined by dividing the total carbohydrate concentration (quantified by phenol-sulfuric acid) by its reducing capacity to obtain the molar ratios of chain populations (Biliaderis, 1982; Paredes-Lopez, Bello-Perez, and Lopez, 1994). Debranched amylopectin from different species (potato, cassava, and waxy rice) evaluated by HPLC-RI shows polymodal distribution, indicating that B-chains are separated in different groups (B1, B2, B3, and B4) (Hizukuri, 1986). The proposed distribution is consistent with the cluster model, which best explains the amylopectin structure: chains B1 and A make a single cluster; chains in fractions B2 and B3 extend into two and three clusters, respectively; and chains in fraction B4 stretch across more than four clusters. Amylopectin molecular weights from normal maize, smooth pea (Aberle et al., 1994), amaranth starch (Bello-Perez et al., 1998c), and waxy corn starch (Millard et al., 1997) were evaluated by the HPSEC-MALLS system. However, Rg is difficult to evaluate in amylopectin by the HPSECMALLS system because heterogeneities in chromatograms may be related to branching density of amylopectin. To better evaluate amylopectin structure by chromatographic methods, some studies have been focused on sample preparation, mainly on the solubilization step. Amylopectin isolated from normal maize solubilized by microwave heating for 35 seconds and analyzed by the HPSEC-MALLS-RI system, showed a Mw 20 × 10-7 g/mol and Rg of 227 nm (Bello-Perez et al., 1998b). However, samples show different chromatography profiles and molecular weight if solubilized with (Mw 2.2 × 108 g/mol) or without DMSO (Mw 9.4 × 107 g/mol) (Bello-Perez et al., 1998a). Concerning the typical botanic structure, an HPSEC profile of debranched cassava starches shows trimodal distribution and structural differences in these populations (Charles et al., 2005). Ion exchange chromatography, specifically anion exchange chromatography (HPAEC), coupled with pulsed amperometric detector (PAD) has allowed us to learn the chain length distribution of the individual components of debranching amylopectin. Amylopectin from different botanical sources debranched with isoamylase shows chains between 10
52
Starches: Characterization, Properties, and Applications
and 13 degrees of polymerization (Koizumi, f*ckuda, and Hizukuri, 1991; Suzuki et al., 1992). Comparisons of the debranching pattern of amylopectin from diverse botanical sources with isoamylase and pullulanase using the HPAEC-PAD equipment have been an effective technique for evaluating chain length distribution (Bello-Perez et al., 1996b). In four groups of chains in several cultivars of rice starch debranched with isoamylase, one was constituted of A-chains and the other three groups corresponded to the B-chains of the cluster model (Patindol and Wang, 2002). Figure3.5 shows a modified HPAEC-PAD chromatographic profile obtained using a postcolumn amyloglucosidase reactor; this system was named HPAEC-ENZ-PAD (Wong and Jane, 1997). The chain length distribution of debranching amylopectin from soft wheat starches obtained by this technique was DP 25.6 and 26.9 and some cultivars had amylopectin with more long chains (DP ≥ 37) and longer average chain length (DP 26.2–26.9). The structural characteristics were related to the thermal and pasting pattern; the gelatinization temperature, paste peak viscosity, and shear thinning increased with increasing branch chain length of amylopectin (Franco et al., 2002). Amylopectin isolated from banana and analyzed by the HPAEC-ENZPAD system showed a higher proportion (24.0%) of longer branch chains (DP ≥ 37) than amylopectin from other botanical sources (normal and waxy maize and rice, barley, and waxy amaranth) (Jane et al., 1999). Using this 8 7
% Peak Area
6 5 4 3 2 1 0
6
10
14
18
22
26 30 34 38 42 Degree of Polymerization
46
50
54
58
Figure 3.5 Amylopectin chain length distribution of normal maize (▪) and barley (▪) starch, measured by high-performance anion exchange chromatography (HPAEC) with pulsed amperometric detection (PAD).
Chapter three: Starch macromolecular structure
53
technique it was also possible to correlate functional properties with morphological and structural characteristics on A- and B-type starch granules from cereal starches, indicating that large granules (A) have a higher proportion of longer chains than small granules (B) (Ao and Jane, 2007).
3.4 Final remarks Starch structure research allows the elucidation mechanism and the identification of specific functional properties. This research is important in understanding the physicochemical and functional starch properties. This knowledge is essential to support breeding programs focused on starch biosynthesis and new varieties with specific starch functionality. It allows us to obtain new starches with improved functionality which can be used to develop new products. The proteomic approach is an important tool for studying starch biosynthesis, relating it to the starch structure.
References Aberle, T., Burchard, W., Vorwerg, W., and Radosta, T.S. 1994. Conformational contributions of amylose and amylopectin to the structural properties of starches from various sources. Starch/Stärke. 46:329–335. Ao, Z. and Jane, J. 2007. Characterization and modeling of the A- and B-granule starches of wheat, triticale and barley. Carbohydrate Polym. 67:46–55. Banks, W. and Greewood, C.T. 1967. The fractionation of laboratory-isolated cereal starches using dimethyl sulphoxide. Starch/Stärke. 19:394–398. Batey I.L. and Curtin B.M. 1996. Measurement of amylose/amylopectin ratio by high-performance liquid chromatography. Starch/Starke. 48:338–344. Bello-Perez, L.A., Colonna, P., Roger P., and Paredes-Lopez, O. 1998c. Macromolecular features of amaranth starch. Cereal Chem. 75(4):395–402. Bello-Perez, L.A., Paredes-Lopez, O., Roger, P., and Colonna, P. 1996a. Molecular characterization of some amylopectins. Cereal Chem. 73:12–17. Bello-Perez, L.A., Paredes-Lopez, O., Roger, P., and Colonna, P. 1996b. Amylopectin: properties and fine structure. Food Chem. 56(2):171–176. Bello-Perez, L.A., Roger P., and Paredes-Lopez, O. 1998. Structural properties of starches dissolved by microwave heating. Starch/Stärke. 50:137–141. Bello-Perez, L.A., Roger, P., Baud, B., and Colonna, P. 1998a. Macromolecular features of starches determined by aqueous high-performance size exclusion chromatography. J. Cereal Sci. 27:267–278. Bello-Perez, L.A., Roger, P., Colonna, P., and Paredes-Lopez, O. 1998b. Laser light scattering of high amylose and high amylopectin materials, stability in water alter microwave dispersion. Carbohydrate Polym. 37:383–394. Biliaderis, C.G., 1982. Physical characteristics, enzymatic, digestibility, and structure of chemically modified smooth pea and waxy maize starches. J. Agric. Food Chem. 30:925–930. Biliaderis, C.G. 1992. Structure and phase transitions of starch in food systems. Food Technol. 46(6):98–109.
54
Starches: Characterization, Properties, and Applications
Biliaderis, C.G., Grant, D.R., and Vose, J.R. 1981. Structural characterization of legume starches. I. Studies on amylose, amylopectin, and beta-limit dextrins. Cereal Chem. 58:496–502. Blanshard, J.M.V. 1987 Starch granule structure and function: A physicochemical approach. In: Starch: Properties and Potentials, Critical Reports on Applied Chemistry, Vol. 13, T. Galliard (Ed.). Chichester, UK: John Wiley & Sons, pp. 16–54. Burchard, W. 1972. Angular distribution of Rayleigh scattering from branched polycondensates. Amylopectin and glycogen types. Macromolecules. 5:604–610. Burchard, W. 1992. Biochemistry. In: Static Dynamic Light Scattering Aproaches to Structure Determination of Biopolymers, S.E. Harding, D.E. Satelle, and V.A. Bloom Ficia (Eds.). UK: Redwood Press, pp. 8–22. Burchard, W. 1993. Plant polymeric carbohydrates. In: Solution Properties of Plant Polysaccharides as a Function of Their Chemical Structure, F. Meyer, D.J. Manners, and W. Seibel (Eds.). Cambridge, UK: The Royal Society of Chemistry, pp. 215–232. Burchard, W. 1997. Particle scattering factors of some branched polymers. Macromolecules. 10(5):920–927. Chang, Y.H. and Lin, J.H. 2007. Effects of molecular size and structure of amylopectin on the retrogradation thermal properties of waxy rice and waxy cornstarches. Food Hydrocolloids. 21:645–653 Charles, A.L., Yung, H.G., Chang, W.C.K., Klanaroth, S., and Tzou, C.H. 2005. Influence of amylopectin structure and amylose content on the gelling properties of five cultivars of cassava starches. J. Agric. Food Chem. 53:2717–2725. Chiou, H., Fellows, C. M., Gilbert, R.G., and Fitzgerald, M.A. 2005. Study of ricestarch structure by dynamic light scattering in aqueous solution. Carbohydrate Polym. 61:61–71. Debye, P. 1947. Molecular-weight determination by light scattering. J. Phys. Colloidal Chem. 51:18–32. Donald, A.M., Waigh, T.A., Jenkins, P.J., Gidley, M.J., Debet, M., and Smith, A. 1997. Internal structure of starch granules revealed by scattering studies. In: Starch: Structure and Functionality, P.J. Frazier, A.M. Donald, and P. Richmond (Eds.). Cambridge, UK: The Royal Society of Chemistry, pp.172–179. Dubois, M., Gilles, K.A., Hamilton, J.K., Rebers, P.A., and Smith, F. 1956. Colorimetric method for determination of sugars and related substances. Anal. Chem. 28:350–356. Fishman, M.L. and Hoagland, P.D. 1994. Characterization of starches dissolved in water by microwave heating in a high pressure vessel. Carbohydrate Polym. 23:175–183. Fishman, M.L., Rodriguez, L., and Chau, H.K. 1996. Molar masses and sizes of starches by high-performance size exclusion chromatography with on-line multiangle laser light scattering detection. J. Agric. Food Chem. 44:3182–3188. Franco, C.M.L., Kit-Sum, W., Sang-ho, Y., and Jay-lin, J. 2002. Structural and functional characteristics of selected soft wheat starches. Cereal Chem. 79(2):243–248. French, D. 1984. Organization of starch granules. In: Starch: Chemistry and Technology, R.L. Whistler, J.N. BeMiller, E.F. Paschall (Eds.). Orlando, FL: Academic Press, pp. 183–247.
Chapter three: Starch macromolecular structure
55
Galinsky, G. and Burchard W. 1995. Starch fractions as examples for nonrandomly branched macromolecules. 1. Dimensional properties. Macromolecules. 28:2363–2370. Galinsky, G. and Burchard, W. 1996. Starch fractions as examples for nonrandomly branched macromolecules. 2. Behavior in the semidilute region. Macromolecules. 29:1498–1506. Galinsky, G. and Burchard W. 1997a. Starch fractions as examples for nonrandomly branched macromolecules. 3. Angular dependence in static light scattering. Macromolecules. 30:4445–4453. Galinsky, G. and Burchard W. 1997b. Starch fractions as examples for nonrandomly branched macromolecules. 4. Angular dependence in dynamic light scattering. Macromolecules. 30:6966–6973. Gallant, D.J., Bouchet, B., and Baldwin, P.M. 1997. Microscopy of starch: Evidence of a new level of granule organization. Carbohydrate Polym. 32:177–191. Gallant, D.J., Bouchet, B., Buleón, A., and Perez, S. 1992. Physical characteristics of starch granules and susceptibility to enzymatic degradation. Euro. J. Clin. Nutrition 46(2):3–16. Galliard, T. and Bowler, P. 1987. Morphology and composition of starch. In: Starch Properties and Potential, T. Galliard (Ed.). Chichester: John Wiley & Sons, pp. 55–78. Greenwood, C.T. 1976. Starch. In: Advances in Cereal Science and Technology, Y. Pomeraz (Ed.). St. Paul, MN: American Association of Cereal Chemists, pp. 119–157. Han, J.A. and Lim, S.T. 2004a. Structural changes of corn starches by heating and stirring in DMSO measured by SEC-MALLS-RI system. Carbohydrate Polym. 55:265–272. Han, J.A. and Lim, S.T. 2004b. Structural changes of corn starches during alkaline dissolution by vortexing. Carbohydrate Polym. 55:193–199. Han, J.A., Lim, H., and Lim, S.T. 2005. Comparison between size exclusion chromatography and micro-batch analyses of corn starches in DMSO using light scattering detector. Starch/Stärke. 57:262–267. Hanselmann, R., Burchard, W., Ehrat, M., and Widmer, H.M. 1996. Structural properties of fractioned starch polymers and their dependence on the dissolution process. Macromolecules. 29:3277–3282. Hizukuri, S. 1986. Polymodal distribution of the chain lengths of amylopectins and its significance. Carbohydrate Res. 147:342–3477. Hood, L.F. 1982. Current concepts of starch structure. In: Food Carbohydrates, D.R. Lineback and G.E. Ingleit (Eds.).Westport, CT: AVI, pp. 217–269. Imberty, A. and Perez, S. 1988. A revisit to three dimensional structure of B-type starch. Biopolymers. 27:1205–1221. Imberty, A., Chanzy H., Perez S., Buleon A., and Tran, V. 1987. New three-dimensional structure for A-type starch. Macromolecules. 20:2634–2636. Imberty, A., Chanzy, H., Perez, S., Buleon, A., and Tran, V. 1988. The double-helical nature of the crystalline part of A-starch. J. Molec. Biol. 201:365–378. Jackson, D.S., Choto-Owen, C., Waniska R.D., and Rooney L.W. 1988. Characterization of starch cooked in alkali by aqueous high-performance size-exclusion chromatography. Cereal Chem. 65:493–496. Jane, J. and Chen, J. 1992. Effect of amylose molecular size and amylopectin branch chain length on paste properties of starch. Cereal Chem. 69:60–65.
56
Starches: Characterization, Properties, and Applications
Jane, J., Chen, Y.Y., Lee, L.F., McPherson, A.E., Wong, K.S., Radosavljevic, M., and Kasemsuwan, T. 1999. Effects of amylopectin branch chain length and amylose content on the gelatinization and pasting properties of starch. Cereal Chem. 76(5):629–637. Jane, J.L., Xu, A., Radosavljevic, M., and Seib, P.A. 1992. Location of amylose in normal starch granules. I. Susceptibility of amylose and amylopectin to cross-linking reagents. Cereal Chem. 69:405–409. Kobayashi, S., Schwartz, S.J., and Lineback, D.R. 1986. Comparison of the structures of amylopectins from different wheat varieties. Cereal Chem. 63(2):71–74. Koizumi, K., f*ckuda, M., and Hizukuri, S. 1991. Estimation of the distribution of chain length of amylopectins by high-performance liquid chromatography with pulsed amperometric detection. J. Chromatog. 585:233–238. Millan-Testa, C.E., Mendez-Montealvo, M.G., Ottenhof, M.A., Farhat, I.A., and BelloPerez, L.A. 2005. Determination of the molecular and structural characteristics of okenia, mango and banana starches. J. Agric. Food Chem. 53:495–501. Millard, M.M., Dintzis, F.R., Willett, J.L., and Klavons, J.A. 1997. Light-scattering molecular weights and intrinsic viscosities of processed waxy maize starches in 90% dimethyl sulfoxide and H2O. Cereal Chem. 74:687–691. Moding, G., Nilson, P.-O., and Wahlund, K.-G. 2006. Influence of jet-cooking temperature and ionic strength on size and structure of cationic potato amylopectin starch as measured by asymetrical flow field-flow fractionation multi-angle light scattering. Starch/Stärke. 58:55–65. Morrison, W. R. 1988. Lipids in cereal starches: A review. J. Cereal Sci. 8:1–15. Nikuni Z. 1978. Studies on starch granules. Starch/Stärke. 30:105–111. Ong, M.H., Jumel, K., Tokarczuk, P.F., Blanshard, J.M.V., and Harding, S.E. 1994. Simultaneous determinations of the molecular weight distributions of amyloses and the fine structures of amylopectins of native starches. Carbohydrate Res. 260:99–117. Paredes-Lopez, O., Bello-Perez, L.A., and Lopez, M.G. 1994. Amylopectin: Structural, gelatinization and retrogradation studies. Food Chem. 50:411–417. Patindol, J. and Wang, Y. 2002. Fine structures of starches from long-grain rice cultivars with different functionality. Cereal Chem. 79:465–469. Radosta, S., Haberer, M., and Vorwerg, W. 2001. Molecular characteristics of amylose and starch in dimethyl sulfoxide. Biomacromolecules. 2:970–978. Robin, J.P., Mercier, C., Charbonniere, R., and Guilbot, A. 1974. Lintnerized starches. Gel filtration and enzymatic studies of insoluble residues from prolonged acid treatment of potato starch. Cereal Chem. 51:389–406. Roger, P. and Colonna, P. 1993. Evidence of the presence of large aggregates contaminating amylose solutions. Carbohydrate Polym. 21:83–89. Roger, P., Axelos, M.A.V., and Colonna, P. 2000. SEC-MALLS and SANS studies applied to solution behavior of linear R-glucans. Macromolecules. 33:2446–2455. Roger, P., Baud, B., and Colonna, P. 2001. Characterization of starch polysaccharides by field flow fractionation-multi angle laser light scattering-differential refractometer index. J. Chromatog. 917:179–185. Roger, P., Bello-Perez, L.A., and Colonna, P. 1999. Contribution of amylose and amylopectin to the light scattering behaviour of starches in aqueous solution. Polymers. 40:6897–6909. Roger, P., Tran, V., Lesect, J., and Colonna, P. 1996. Isolation and characterization of single chain amylose. J. Cereal Sci. 24:247–262.
Chapter three: Starch macromolecular structure
57
Rolland-Sabate, A., Amani, G.G., Dufour, D., Guilois, S., and Colonna, P. 2003. Macromolecular characteristics of ten yam (Dioscorea spp) starches. J. Sci. Food Agric. 83:927–936. Rolland-Sabate, A., Colonna, P., Mendez-Montealvo, G., and Planchot, V. 2007. Branching features of amylopectins and glycogen determined by asymmetrical flow field flow fractionation coupled with multiangle laser light scattering. Biomacromolecules. 8:2520–2532. Schoch, T.J. 1942. Fractionation of starch by selective precipitation with butanol. J. Amer. Chem. Soc. 64:2954–2956. Schoch, T.J. 1964. Iodometric determination of amylose. Potentiometric titration: Standard method. In: Methods in Carbohydrate Chemistry. Vol. IV, R.L. Whistler (Ed.). Orlando, FL: Academic Press, pp. 157–160. Stevenson, D.G., Jane, J., and Inglett, G.E. 2007. Characterization of jicama (Mexican potato) (Pachyrhzus aerosus L. Urban) starch from taproots grown in USA and México. Starch/Stärke. 59:132–140. Stevenson, G.D., Domoto, A.P., and Jane, J. 2006. Structures and functional properties of apple (Malus domestica Borkh). Carbohydrate Polym. 63:432–441. Suzuki, A., Kaneyama, M., Shibanuma, K., Takeda, Y., Abe, J., and Hizukuri, S. 1992. Characterization of lotus starch. Cereal Chem. 69:309–315. Takeda, Y., Hizukuri, S., and Juliano, B. 1986. Purification and structure of amylose from rice starch. Carbohydrate Res. 148(2):299–308. Takeda, Y., sh*taozono, T., and Hizukuri, S. 1988. Molecular structure of corn starch. Starch/Stärke. 40:51–54. Takeda, C., Takeda, Y., and Hizukuri S. 1993. Structure of the amylopectin fraction of amylomaize. Carbohydrate Res. 246:273–281. Tester, R.F., Karkalas, J., and Qi, X. 2004. Starch: Composition, fine structure and architecture. J. Cereal Sci. 39:151–165. Tetchi, F.A., Rolland-Sabate, A., Amani, G.N., and Colonna, P. 2007. Molecular and physicochemical characterisation of starches from yam, cocoyam, cassava, sweet potato and ginger produced in the Ivory Coast. J. Sci. Food Agric. 87:1906–1916. Thielking, H. and Kulicke, W.M. 1996. On-line coupling of flow field-flow fractionation and multiangle laser light scattering for the characterization of macromolecules in aqueous solution as illustrated by sulfonated polystyrene samples. Anal. Chem. 68:1169–1173. Timpa, J.D. 1991. Application of universal calibration in gel permeation chromatography for molecular weight determinations on plant cell wall polymers: Cotton fiber. J. Agric. Food Chem. 39:270–275. Vorwerg, W., Radosta, S., and Leibnitz, E. 2002. Study of a preparative-scale process for the production of amylose. Carbohydrate Polym. 47:181–189. Wang, L.Z. and White, P.J. 1994. Structure and properties of amylose, amylopectin, and intermediate materials of oat starches. Cereal Chem. 71:263–268. Wong, K.S. and Jane, J. 1997. Quantitative analysis of debranched amylopectin by HPAEC-PAD with a post-column enzyme reactor. J. Liquid Chromatog. 20:297–310. Wu, H.C.H. and Sarko, A. 1978a. The crystal structures of A- B- and C-type polymorphs of amylose and starch. Starch/Stäerke. 30:73-78. Wu, H.C.H. and Sarko, A. 1978b. The double-helical molecular structure of crystalline A-amylose. Carbohydrate Res. 61:27–40.
58
Starches: Characterization, Properties, and Applications
Yoo, S.H. and Jane, J. 2002a. Molecular weights and gyration radii of amylopectins determined by high-performance size-exclusion chromatography equipped with multi-angle laser-light scattering and refractive index detectors. Carbohydrate Polym. 49:307–314. Yoo, S.H. and Jane, J.B. 2002b. Structural and physical characteristics of waxy and other wheat starches. Carbohydrate Polym. 49:297–305. You, S., Fiedorowicz, M., and Lim, S. 1999. Molecular characterization of wheat amylopectins by multiangle laser light scattering analysis. Cereal Chem. 76:116–121. You, S., Stevenson S.G., Izydorczyk M.S., and Preston K.R. 2002. Separation and characterization of barley starch polymers by a flow field-flow fractionation technique in combination with multiangle light scattering and differential refractive index detection. Cereal Chem. 79:624–630. Yuan, R.C., Thompson, D.B., and Boyer, C.D. 1993. The fine structure of amylopectin in relation to gelatinization and retrogradation behavior of maize starches from three wx-containing genotypes in two inbred lines. Cereal Chem. 70:81–89. Zhong, F., Yokoyama, W., Wang, Q., and Shoemaker, C.F. 2006. Rice starch amylopectin and amylose: molecular weight and solubility in dimethyl sulfoxidebased solvents. J. Agric. Food Chem. 54:2320–2326. Zobel, H.F. and Stephen, A.M. 1996. Starch: Structure, analysis and application. In: Food Polysaccharides and Their Application, A.M. Stephen (Ed.). New York: Marcel Dekker, pp.19–66.
chapter four
Solid-state NMR applied to starch evaluation Maria Inês Bruno Tavares
InstitutodeMacromoléculas, Universidade Federal do Rio de Janeiro
Contents 4.1 Introduction.............................................................................................. 59 4.2 Principles of NMR................................................................................... 60 4.2.1 NMR solid state............................................................................ 61 4.2.2 High resolution in NMR solid state.......................................... 62 4.2.2.1 Magic angle spinning (MAS)...................................... 62 4.2.2.2 Cross-polarization magic angle spinning (CPMAS)......................................................................... 64 4.2.2.3 Variable contact time (VCT) experiment................... 65 4.2.3 Low magnetic field...................................................................... 66 4.2.3.1 T1H determination........................................................ 67 4.2.3.2 T2 determination........................................................... 68 4.3 Final remarks............................................................................................ 69 References........................................................................................................... 69
4.1 Introduction The nuclear magnetic resonance spectroscopy (NMR) technique, in both the solution and solid states, is a useful tool in the chemical characterization of polymers. NMR spectrometers with strong magnetic fields employing pulse radiofrequency (RF) allow us to perform characterization on several biopolymers, mainly on amorphous solid samples (Komoroski, 1986; McBrierty and Parker, 1993; Harris, 2000), and special NMR tools have been developed to improve solid resolution. Consequently, important and precise information about linking among structure, microstructure, and properties can be obtained by NMR (Sanders and Hunter, 1993; Bovey and Mirau, 1996; Harris, 1996; Schmidt-Rohr and Spiess, 1999). 59
60
Starches: Characterization, Properties, and Applications
Because NMR solid state can provide details about crystalline structure and differences on domain composition (Harris, 1996; Silva and Tavares, 1996), it becomes particularly important in starch characterization. Because of the NMR solid-state accuracy in evaluating amorphous and heterogeneous materials, polymorphism, and phase transition (Harris, 2000), several researchers have employed it as a tool for understanding starch and polysaccharide structure, crystallinity, molecular organization/orientation, and molecular dynamics (Gidley and Bociek, 1985; Cheethan and Tao, 1998; Tang, Godward, and Hills, 2000; Conte, Spaccini, and Piccolo, 2004). NMR relaxation times have been successfully used to provide details about starch structure and heterogeneity (Bovey and Mirau, 1996; Silva and Tavares, 1996; Harris, 1996; Tavares, 2000, 2003). The relaxation rate depends on sample composition, its moisture content, and distribution of crystalline and amorphous phases along the domains. Proton spin-lattice relaxation time can also provide details about domain distinctions and structural features (Costa et al., 2007a,b; Souza and Tavares, 2002).
4.2 Principles of NMR The NMR technique is based on the principle that, if a nucleus with angular moment (P) and magnetic moment (µ) is placed in a probe in a static magnetic field (B0), the angular moment takes up an orientation along the direction of the magnetic field (z), depending on the energy levels. The nucleus starts processing in the various energy levels, such as α (less energy) and β (high energy). Thus, the excess nucleus population, defined as vector magnetization (Mo), in the α energy level can be irradiated to the β energy level, because the same frequency precession, called Larmor frequency (ν), is applied to this nucleus by the B1 field, which transfers the magnetization for the xy plane. When the radio frequency emission is switched off, the nuclear spins are deflected from their position through an angle θ; this magnetization will return to the fundamental state and the relaxation process can begin. In this process two relaxation times occur simultaneously: one called “transversal relaxation” or “spin–spin,” which occurs in the xy plane at time constant T2, and another one denominated “longitudinal relaxation” or “spin–lattice,” which occurs at the z axis at time constant T1. The NMR signal is detected after RF has been switched off by a free induction decay process (FID), which results in a free precession of nuclear spins that results in its return to the equilibrium. The T1 and T2 relaxation processes are governed by fluctuating magnetic fields associated with the molecular motions; both relaxations are assumed to be first-order processes. T1 relaxation is an enthalpic process, because this process involves energy absorption. A temporal evolution of a transversal relaxation (T2) process differs from the longitudinal
Chapter four: Solid-state NMR applied to starch evaluation
61
foundation. It is equivalent to the loss of the coherence phase between individual magnetic moments on precession, and results in an increase in entropy (Gidley and Bociek, 1985; Cheng, 1991; Stejskal and Memory, 1994; Bovey and Mirau, 1996; Silva et al., 2002; Souza and Tavares, 2002; Tang and Hills, 2003; Tavares, 2003; Conte, Spaccini, and Piccolo, 2004; Nascimento, Tavares, and Nascimento, 2007; Costa et al., 2007a,b). These relaxation times are measured in distinct ways: T1 is determined through an inversion-recovery pulse sequence, occurring along the z axis and depending on a strong magnetic field, the MHz frequency observation scale, whereas T2 is determined by pulse sequence, occurring in the xy plane and is also dependent on the external magnetic field.
4.2.1 NMR solid state NMR solid-state parameters, such as pulse sequences, can provide details about behavior and molecular mobility of samples, allowing data gathering in different time scales, such as MHz and kHz. It allows development of specific NMR methods according to the sample nature, as done with starch samples (Harris, 2000). The solid-state analyses are different from liquid analyses for two reasons. The first one is related to the signal width. In NMR solid state the signals are wider than those of the liquids, mainly in polymer samples due to the high molecular weight, hydrogen bonds, and monomer links. The second reason is associated with the response of the measurements; normally in the solid state it is possible to have more information than in the liquid state because the whole sample is analyzed without solvent influence. As a consequence more details can be obtained from the chemical structure and molecular dynamic (Edbon, 1980; Cheng, 1991; Costa, Oliveira, and Tavares, 1998; Costa et al., 2007a; Tang, Godward, and Hills, 2000; Tavares, 2000; Conte, Spaccini, and Piccolo, 2004; Souza and Tavares, 2002). Furthermore, when the sample is insoluble or has low solubilization, it needs to be analyzed by solid state. NMR solid state also has the advantage of providing information about the relationship between structure and properties, such as sample hom*ogeneity, phase dispersion, and interaction of components. Moreover, it is a nondestructive and noninvasive technique. NMR spectra obtained from liquid samples often provide narrow signals, with better resolution than the solid ones due to chemical shift isotropy. Because samples are in solution, all interactions such as shielding, dipolar coupling, and indirect coupling depending on nuclear orientation in the magnetic field Bo are compensated by isotropic movements. Therefore, the sample nature, its solvent interaction, and external magnetic field strength can influence the results (Conte, Spaccini, and Piccolo, 2004; Tang, Godward, and Hills, 2000; Costa et al., 2007a; Tavares 2000, 2003).
62
Starches: Characterization, Properties, and Applications
In solid samples, molecular mobility is smaller than in liquid samples. However, the majority of samples (excluding the crystals) have no molecular orientation of the NMR signal, causing a wideness signal due to the random distribution of the signal orientation. This factor comes from the chemical shift anisotropy as well as from the strong dipolar interaction between hydrogen and 13C nuclei. Sample structure and the observed nuclei are also fundamental factors that can contribute to spectral resolution in the solid state. The spectrum obtained from the NMR solid state results from the molecular dynamic behavior of the sample, which reflects its heterogeneity, the interactions of components, and relationship of the molecular dynamic characteristics. Sometimes the wideness of NMR signals in the solid state does not reveal information about the molecular structure. The development of NMR solid-state methods produced solid-state spectra with narrow signals, enabling its use in studies of polymeric systems, including starches.
4.2.2 High resolution in NMR solid state The influence of factors on solid-state signals is defined as a sum of several Hamiltonian contributions, according to the following expression (4.1).
HRMN = H Z + HRF + HCSA + HD + HJ + HQ
(4.1)
where H Z = Zeeman interaction, H RF = radiofrequency, HCSA = chemical shift anisotropy, HD = dipolar interaction, HJ = coupling constant, and HQ = quadrupole moment. When a spin ½ nuclei is observed, for example, 13C, the main contribution in signal width comes from HCSA and HD. Because this contribution can be fractionated as proposed in expression (4.1), signal resolution of spectra from the NMR solid state can be improved, reducing the wideness arising from mathematical methods (Komoroski, 1986; Stejskal and Memory, 1994; Bovey and Mirau, 1996; Conte, Spaccini, and Piccolo, 2004).
4.2.2.1 Magic angle spinning (MAS) Combining factors such as strong dipolar interaction between H and 13C, the restricting solids’ molecular mobility, and chemical shift anisotropy result in a wide signal in the NMR solid sample, with line width around 20 kHz. Supression of dipole–dipole interaction results in narrowing the signal to 5 kHz and elimination of chemical shift anisotropy changes the signal width to 100 Hz, allowing an NMR solid-state spectrum with narrow signals. Both dipolar interaction and chemical shift anisotropy are dependent on the term 3 cos2θ – 1. The suppression or reduction of both effects is done by sample spinning at high frequency at an angle of
Chapter four: Solid-state NMR applied to starch evaluation
63
54.74°, with magnetic field direction able to eliminate the 3 cos2θ – 1, allowing a strong dipolar decoupling that results in significant narrowing of the NMR signal (Costa, Oliveira, and Tavares, 1998; Conte, Spaccini, and Piccolo, 2004; Stejskal and Memory, 1994). The pulse sequence employed is single (basic):
Hydrogen decoupling
observed= [90°x → FID – t]n where t is the recycle delay between 90° pulses and n is the number of scans. The recycle delay (t) is directly associated with the spin-lattice relaxation times of the different nuclei types. Thus, variations of this parameter can provide information about sample molecular mobility. All nuclei in resonance phenomenon can be analyzed by MAS technique, which employs the single pulse sequence. However, to observe the nuclei with a quadrupole moment, it is necessary to use specific techniques or probes and stronger magnetic fields, because the NMR signal widths of those nuclei are wider than the nuclei with dipolar moments. Observing nuclei with dipolar moments by MAS technique allows obtaining narrow signals and high spectral resolution. Because polymers have high molecular weight and consequently wide NMR signals, their NMR solid-state spectra provide information about the chemical structure of the molecular mobility chains. However, fine structures such as those of polymers can only be seen in NMR solution analysis (Gidley and Bociek, 1985; McBrierty and Parker, 1993). MAS is basically employed on solid-state samples; thus it can be used for both qualitative and quantitative results. Therefore, due to the high relaxation time values, it necessarily requires a long time to perform quantitative analyses. In solids the spin–spin relaxation time is short, resulting in fast FID decay. Consequently, in this case, the spin–lattice relaxation is very long, mainly for nuclei with a rare spin. Thus, variation in the spectral parameters such as pulse sequence, allows obtaining information about material hom*ogeneity, compatibility, and molecular mobilities of starches and other polymers (Gidley and Bociek, 1985; Tang and Hills, 2003). On amorphous polymers such as starch, this technique allows us to observe the molecular mobility and the presence of minor compounds with low molecular weights, such as lipids. These compounds with low molecular weights and water are responsible for the changes in the molecular mobility of starches (Stejskal and Memory, 1994). Figure4.1 shows the 13C MAS NMR spectrum of flour obtained from the mango seed with a short recycle delay (0.3 ms). The width signals on the spectrum are due to the heterogeneous and amorphous sample nature
64
Starches: Characterization, Properties, and Applications 72.767
100
80
60
40
Figure 4.1 13C MAS NMR spectrum of seed flour from bourbon mango.
and the main signal detected refers to the 2, 3, and 5 carbons from the hexose structure, identified in the high molecular mobility domain, which is probably located in the amorphous region of the starch granule.
4.2.2.2 Cross-polarization magic angle spinning (CPMAS) The cross-polarization technique is employed on NMR spectra of the nucleus considered as rare spins, which are less abundant in nature, such as isotope 13C (Sanders and Hunter, 1993; Stejskal and Memory, 1994; Conte, Spaccini, and Piccolo, 2004). Its objective is to make the analysis time shorter than required in basic MAS analysis. It is based on a polarization transfer of abundant spin (1H) to rare spin (13C); because 13C and 1H nuclei are in thermal contact for the time established (contact time) for the cross-polarization transfer to occur. During this time the nuclei are kept in contact at an identical frequency precession in the Hartman–Hahn condition (expression 4.2).
ωHBH = ω CBC
(4.2)
The cross-polarization technique combined with magic angle spinning (CPMAS) and high power hydrogen decouple allows us to obtain NMR solid-state high-resolution spectra of rare spin nuclei. Because the hydrogen nucleus is in the relaxation process, the intensity of signals increases and the time required for obtaining the signal is shorter than in MAS. Figure4.2 exhibits the 13C CPMAS–NMR spectrum of flour from the mango bourbon seed, where three signals are detected: one located at 73 ppm, due to CH–OH groups, another one located at 62 ppm related to CH2–OH groups, and a third one located at 101 ppm, which refers to anomeric carbon CH–O–CH from the glycoside link. The applied pulse sequence to obtain NMR spectra via CPMAS is the same as that applied in the MAS technique; however, the introduction of Hartman–Hahn conditions provides a cross-polarization transfer between the proton and 13C, promoting an increase in the 13C intensity signal, whereas the proton intensity signal decreases. Thus, CPMAS and high-power hydrogen
Chapter four: Solid-state NMR applied to starch evaluation
65
73.172
62.894
101.822
120
100
80
60
Figure 4.2 13C CPMAS NMR spectrum of seed flour from mango bourbon.
decoupling can provide NMR solid-state spectra with details about the sample’s molecular structure and hom*ogeneity. With this technique, changes in the signal width and in the chemical shift values are related to the changes in molecular mobility. For example, comparing 13C MAS (Figure4.1) and 13C CPMAS (Figure4.2) NMR spectra, two domains with different molecular mobility in the sample can be observed, as well as a third domain, which is probably a result of the interaction of both these domains.
4.2.2.3 Variable contact time (VCT) experiment This technique promotes a scanning of contact times, which generates a series of 13C NMR spectra with different contact times. These results provide details about sample heterogeneity, molecular mobility, intermolecular interactions, and the value of proton spin–lattice in the rotating frame (T1ρH) (Costa, Oliveira, and Tavares, 1988; Tavares, 2003), which is obtained from the 13C decays during the variable contact time and hydrogen nuclei relaxation process. Figure4.3 shows spectra obtained from VCT analysis of flour from seed mango, where it is possible to identify a series of 13C spectra with contact times varying from short (200 ms, A) to long values (8,000 ms, G). Flours from cereals or seeds present one rigid domain that controls the relaxation process; the decay is more abrupt at the end of the experiment, indicating that the rigid domain is interacting with
66
Starches: Characterization, Properties, and Applications Mango bourbon
A
B
C
D
E
F
G
Figure 4.3 13C VCT NMR spectra of seed flour from mango bourbon: (A = 200, B = 400, C = 800, D = 1000, E = 2000, F = 4000, G = 8000 ms).
Table4.1 T1ρH Values for Assigned Carbons Carbon type C–O–C CH–O CH2OH
δ (ppm)
T1ρH (ms)
101.8 73.1 62.8
3 5 7
the mobile domain. Successive decays controlled by the protons’ spatial proximity on the 13C spectra are observed, where it is possible to obtain the proton spin–lattice relaxation time in the rotating frame. It shows the molecular mobility and the interactions between domains, with size at 4 nm. The decay intensity of the 13C signals during this experiment can be quick, slow, or intermediate; it depends on the molecular mobility and spatial interactions on the samples. Table4.1 shows the values of this parameter for the assigned carbons of the flour from seed mango, which are 101.8 ppm (anomeric carbon), 73.1 ppm (2, 3, 4, and 5 CH–O carbons, from the glycosidic ring), and 62.8 ppm (carbon 6, CH2–OH). According to these relaxation data, the increase of the proton spin–lattice relaxation time in the rotating frame value is promoted by an increase of carbon molecular mobility, resulting in the high level of freedom rotation and translation of the observed nuclei.
4.2.3 Low magnetic field In low-field NMR spectrometers such as 23 MHz, due to low intensity, the obtained spectra do not provide information on chemical shift at solid state. Thus, these spectrometers are not used in studies of chemical structure, but they are useful to determine the relaxation time, mainly in food samples. In NMR analysis, the thermal equilibrium of the spin systems is disturbed when radiofrequency resonance is applied and, when it is switched off, a relaxation mechanism occurs.
Chapter four: Solid-state NMR applied to starch evaluation
67
Two relaxation parameters are often used to determine molecular mobility, T1H and T2H. In low-field NMR proton relaxation, parameters T1 and T2 can be directly measured employing their proper pulse sequences, providing information about interactions in the sample (Cheng, 1991; Stejskal and Memory, 1994; Bovey and Mirau, 1996; Harris, 1996; Silva et al., 2002). Proton T1 relaxation is related to the return of Mo (initial magnetization aligned to Bo) magnetization to equilibrium after radiofrequency has been switched off. Proton T2 is related to the inverse of signal width, and occurs due to the loss of phase precession coherence of the nucleus after it has been excited in the direction of the applied magnetic field (Bovey and Mirau, 1996; Harris, 1996). However, relaxation times determined by NMR allow evaluating the plasticization effect. It is also possible to compare the macromolecular structure in each domain. T1H and T2H relaxation times can be measured in a wide range of temperatures and they allow the observation of plasticizing properties and macromolecular mobility on samples including starch, flours, and polysaccharides (Gidley and Bociek, 1985; Harris, 2000; Tang, Godward, and Hills 2000; Souza and Tavares, 2002).
4.2.3.1 T1H determination
The pulse sequence inversion recovery is the most accurate NMR method to measure the proton spin–lattice relaxation time (T1H). This relaxation process is dependent on the magnetic field and occurs on the z axis. In this process the energy excess (thermal energy) is transferred directly to the lattice as dipolar interaction. During this relaxation, an enthalpy decrease occurs in the spin nuclear system (Schmidt-Rohr and Spiess, 1999). The equilibrium undergoes magnetization, resulting in a first-order process at constant rate (R1) and constant time (T1). From the values determined for this parameter it is possible to evaluate the molecular dynamics of samples and also their hom*ogeneity, which is very useful in studies of samples such as starch granules (Stejskal and Memory, 1994; Harris, 2000; Tavares, 2003; Silva et al., 2002). The applied pulse sequence is described as follows.
Observed nuclei [180°X – τ – 90°X]n
where τ is a time interval between pulses. Table 4.2 shows the values of proton spin–lattice relaxation time on starches from cereals and fruit seeds, obtained by an inversion recovery pulse sequence in an NMR low-field spectrometer. The values suggest that the starches from cereals present similar behavior, such as observed on corn and wheat starches, even if starch from wheat is more rigid than the starch from corn due to its macromolecular arrangement and also to the quantity, form, and water distribution in the starch granules. Therefore,
68
Starches: Characterization, Properties, and Applications Table4.2 Proton Spin–Lattice Relaxation Times for Starches Starch Corn
Wheat
Cumbaru
T1H (ms) 4 84 124 7 97 137 1 38 172
when compared with starches from cereal, starches from seed fruit present some particularities such as higher free-water mobility, higher intermediate molecular mobility (probably due to the higher movement freedom of carbon 6, which can be in different arrangements with different amorphous region distributions), and a region with higher rigidity composed of a crystalline and constricted amorphous region rich in fibers.
4.2.3.2 T2 determination
In solid samples, T2H relaxation time can be obtained by the signal width. However, the heterogeneity of the magnetic field causes different nuclei processes’ magnetizations at different rates when the radiofrequency is switched off at a determined time (τ). This time is chosen as a function of the sample mobility. Therefore, this lack of hom*ogeneity is refocused after a 180° pulse is applied, turning one magnetization (Komoroski, 1986; Stejskal and Memory, 1994; Souza and Tavares, 2002). The pulse sequence employed to determine the T2 relaxation parameter is Carr–Purcell– Meiboom–Gill (CPMG), which is described below:
(90°x – τ – 180°x) decay
This relaxation time, as well as spin–lattice relaxation time, provides information about sample mobility at the molecular level, allowing the evaluation of the molecular dynamic. Sometimes, the T2H parameter corroborated with the T1H can provide details about sample behavior. Table 4.3 shows the spin–spin relaxation times for starches from cereals and fruit seed, using an inversion recovery pulse sequence in a NMR low field. Two values of T2H are observed in cereal starches, whereas three values are detected in starches from fruit seed, suggesting that these starches show different structural behavior according to
Chapter four: Solid-state NMR applied to starch evaluation
69
Table4.3 Spin–Spin Relaxation Times for Starches Starch Corn Wheat Cumbaru
T2H (ms) 6 98 6 87 3 68 134
their molecular organization and arrangements, inter- and intramolecular interactions, and water distribution on the starch granule. The T2H behavior was more expected for starch derived from fruit seed, in relation to the distinction of molecular mobility of the material regions, compared to cereal starches. Therefore, the same behavior of T1H was in evidence for T2H.
4.3 Final remarks NMR solid state can be useful in the characterization of starches, allowing us to obtain information about chemical structure, molecular dynamics behavior, and macromolecular interactions. It can be an alternative in food analysis, because results are accurate, rapid, and reproducible, providing information about the complex matrix. In starch characterization, NMR can give complementary information to x-diffractograms and thermal analysis, contributing to knowledge about starch structure, morphology, and dynamic behavior.
References Bovey, F.A. and Mirau, P.A. 1996. NMR of Polymers. New York: Academic Press. Cheethan, N.W.H. and Tao, L. 1998. Solid state NMR studies on the structural and conformation properties of natural maize starches. Carbohydrate Polymers. 36: 285–292. Cheng, H.N. 1991. NMR characterization of polymers. In: Modern Methods of Polymer Characterization, H.G. Barth and J.W. Mays (Eds.).113: 409–493. Series Chemical Analysis. Winefordner. Conte, P., Spaccini, P., and Piccolo, A. 2004. State of the art of CPMAS 13C-NMR spectroscopy applied to natural organic matter. Prog. Nuclear Magnet. Reson. Spectros. 44: 215–223. Costa, D.A., Oliveira, C.M.F., and Tavares, M.I.B. 1998. Solid-state nuclear magnetic resonance of the PA6/PC, PA6/PPO and PA6/PC/PPO blends. J. Appl. Polym. Sci., 69:129–136.
70
Starches: Characterization, Properties, and Applications
Costa, P.M., Tavares, M.I.B., Bathista, A.L.B.S., Silva, E.O., and Nogueira, J.S. 2007a. High resolution NMR study of tropical fruit seed starches. J. Appl. Polym. Sci., 105: 973–977. Costa P.M., Tavares, M.I.B., Silva, E.O., Bathista, A.L.B.S., Nogueira, J.S., Filho, N.P., Ferreira, A.G., Barison, A., Daolio, C., and Vizzotto, L. 2007b. NMR and X-ray studies of derived from tropical fruit seed gelatinization process. Int. J. Polym. Mater. 56:1135–1143. Edbon, J.R. 1980. Developments in Polymer Characterisation, J.V. Dawking (Ed). London: Applied Science. Gidley, M.J. and Bociek, S.M.J. 1985. Molecular organization in starches: A 13C CPMAS NMR study. J. Am. Chem. Soc. 107:7040–7044. Harris, R.K. 1996. NMR studies of solid polymer. In: Polymer Spectroscopy, A.H. Fawcell (Ed.). UK: John Wiley & Sons. Harris, R.K. 2000. Recent advances in solid state NMR. In: Proceedings of the Fifth International Conference on Applications of Magnetic Resonance in Food Science, Aveiro, Portugal, Vol. I, 1–11, University of Aveiro, Portugal. Komoroski, R.A. 1986. In: High Resolution NMR Spectroscopy of Synthetic Polymers in Bulk, R.A. Komoroski (Ed.). Deerfield Beach, FL: VCH. McBrierty, V. and Parker, K. J. 1993. Nuclear Magnetic Resonance in Solid Polymers. Cambridge, UK: Cambridge University Press. Nascimento, A.M.R., Tavares, M.I.B., and Nascimento, R.S. 2007. Solid state NMR study of Couma utilis seeds. Int. J. Polym. Mater. 56:365–386. Sanders J.K.M. and Hunter, B.K. 1993. Modern NMR Spectroscopy: A Guide for Chemists, 2nd ed. Oxford: Oxford University Press. , Schmidt-Rohr, K. and Spiess, H. W. 1999. Multidimensional Solid-State NMR and Polymers, 3rd ed., New York: Academic Press. Silva, E.O., Tavares, M.I.B., Bathista, A.L.B.S., Filho, N.P., and Nogueira, J.S. 2002. High resolution 13C NMR study of natural resins. J. Appl. Polym. Sci. 86:1848–1854. Silva, N.M. and Tavares, M.I.B. 1996. Characterization of EPDM/atactic polypropylene blends by high resolution solid-state NMR. J. Appl. Polym. Sci. 60:663–667. Souza, C.M.G. and Tavares, M.I.B. 2002. High resolution solid state nmr and sem study of the interaction behavior of poly(ethylene-co-vinyl acetate)/ poly(vinyl acetate) blends. J. Appl. Polym. Sci. 86:116–124. Stejskal, E.O. and Memory, J.D. 1994. High Resolution NMR in the Solid State. New York: Oxford University Press. Tang, H. and Hills, B.P. 2003. Use of 13C MAS NMR to study domain structure and dynamics of polysaccharides in the native starch granules. Biomacromolecules. 4:1269–1276. Tang, H., Godward, J., and Hills, B. 2000. The distribution of water in native starch granule: A multinuclear NMR study. Carbohydrate Polym. 43:375–387. Tavares, M.I.B. 2000. NMR Molecular dynamic study of high crystalline polymers. Polym. Test. 19:899–904. Tavares, M.I.B. 2003. High-resolution 13C-nuclear magnetic resonance study of heterogeneous amorphous polymers.J. Appl. Polym. Sci. 87:473–476.
chapter five
Thermal transitions of starches Paul Colonna and Alain Buleon
Institut National de la Recherche Agronomique
Contents 5.1 Introduction.............................................................................................. 72 5.2 Disorganization of starch granules....................................................... 73 5.2.1 Phenomenological changes of gelatinization, pasting, and melting................................................................................... 73 5.2.1.1 In excess moisture (water:starch ratio > 1.5)............. 73 5.2.1.2 In reduced moisture (water:starch ratio < 1)............. 75 5.2.2 Mechanisms of gelatinization and melting............................. 75 5.2.3 Functional properties.................................................................. 78 5.2.3.1 Starch pastes in excess moisture (water: starch ratio >1.5)........................................................................ 79 5.2.3.2 Starch pastes in reduced moisture (water: starch ratio 1.5) Under polarizing microscope observation, native starch granules show a dark birefringence cross (“Maltese cross”), which is characteristic of a spherulitic macromolecule organization inside each granule. The loss of the birefringence during gelatinization reflects the disappearance of the radial organization of amylopectin and amylose chains. Gelatinization corresponds to irreversible disruption of molecular order within the starch granules observed when aqueous dilute suspensions of starch granules are heated above 60°C (Blanshard, 1987). A loss of birefringence occurs in a temperature range characteristic of each type of starch according to its botanic origin: potato starch from 56 to 66°C, wheat starch from 52 to 63°C, maize starch from 62 to 72°C, and rice starch from 66 to 77°C. During gelatinization, several events take place simultaneously: diffusion of water inside the starch granule with a limited swelling, disappearance of birefringence, loss of crystallinity of the granule, endothermal phase transitions, predominant swelling of the granule after the loss of birefringence, and a decrease in the relaxation times of the water molecules. Gelatinization exhibits two-stage behavior. The first is a limited swelling and a low level of solubilization, located around the gelatinization temperature of 60–75°C. Tester and Morrison (1990) stated that swelling is primarily the property of amylopectin and that amylose and lipids inhibit
74
Starches: Characterization, Properties, and Applications
swelling of starches. The second step occurs above 90°C: granules swell and disrupt, leading to a more or less complete solubilization (30–60%). In swelling and gelatinization, the starch granules may undergo changes into various shapes. A tangential swelling has been observed for normal cereal starches, supposedly due to the hydration and lateral expansion of lateral crystallites. For Marchant and Blanshard (1978), gelatinization is a semi-cooperative process, due to the relationship between the hydration-facilitated melting of the crystalline regions and the swelling owing to further hydration of disordered polymer chains in the amorphous zones. The undispersed fraction of the granules swells by absorbing 10 to 30 times its weight in water as a function of temperature, according to the type of starch. All laboratory procedures are far from industrial conditions of gelatinization, where shearing and high heating rate play an important function. During gelatinization, changes on a microscopic scale occur simultaneously with nanoscale changes. The loss of crystallinity can be detected as an endothermic event by differential scanning calorimetry (DSC). Amylose-rich starches yield very broad endotherms, with higher melting temperatures (between 80 and 130°C) (Colonna et al., 1982; Inouchi et al., 1991). In addition, a second reversible endothermic transition is observed near 100°C for lipid-containing cereal starches. This transition is usually assigned to the melting of the amylose–lipid complex. The use of synchrotron radiation allows the diffraction diagrams of starch to be picked up at very short intervals upon heating, and thus the kinetics of starch melting and amylose complexation to be followed. Garcia et al. (1996) and Jenkins and Donald (1998) have already used synchrotron radiation to study the gelatinization/melting behavior of wheat and cassava starches, respectively. Each type of starch gives an endotherm characterized by its enthalpic change (10–20 J g–1) with characteristic temperatures (beginning, midpoint, end). The enthalpy of gelatinization is a net thermodynamic quantity corresponding to the granule swelling, crystallite melting, hydration, and even recrystallization (exothermic) when complexable lipids are present. For most cereal starches which contain complexable lipids, an additional reversible endothermic transition is observed at 95–105°C, which represents a disordering transition of amylose–lipid complexes. These complexes are formed when amylose chains are released during gelatinization. Changes occurring by gelatinization also can be observed by x-ray diffractometry, where A and B patterns disappear and a V pattern, which is attributed to the amylose–lipid complex, is observed, except for starches that are either waxy or do not contain lipids. X-ray diffractometry gives quantitative information about the residual crystallinity (Le Bail et al., 1999).
Chapter five: Thermal transitions of starches
75
After gelatinization with infrared spectroscopy, the intensity of the band at 1047 cm–1 decreases mainly due to the line-broadening process of the bands at 1047 and 1022 cm–1. The reverse process involving reappearance at 1047cm-1 is usally observed during gelation. Therefore the ratio 1047/1022 cm–1 is often interpreted as related to the amount of short-range order (double-helix content) relative to the amorphous content. Initially, the breakage of the hydrogen bonds from crystalline zones gives a huge water absorption band, followed by a leaching of macromolecules of lower molecular weight, mainly amylose. This event can be mainly explained by the difference in diffusional coefficients: DTz values are 1.2 × 10 –7, 8–15 × 10 –12, and 1.7 × 10 –12 m2.s–1 for water, amylose, and amylopectin, respectively. Pasting is the rheological description of this event. Starch pastes correspond to suspension of swollen and empty starch granules, also called “ghosts,”and solubilized amylose and amylopectin macromolecules outside the ghosts.
5.2.1.2 In reduced moisture (water:starch ratio < 1) The designation “starch melting” includes the losses of crystallinity and native granular structures. Melting occurs at low moisture (as low as 11% w/w) and high temperature (as high as 180°C), where shear and heat enable the formation of a viscoelastic melt (Vergnes, Della Valle, and Colonna, 2003). By submitting low-moisture starch to high shear stresses and temperatures, a macroscopic hom*ogeneous molten phase is obtained, due to starch melting. Such phenomena are achieved on extruders and their extent may vary according to the parameters resulting in the versatility of this process: screw and die geometries and arrangement, barrel temperature, screw speed, and water addition. The viscous behavior of starches can change according to amylose content and it can be adjusted to an empirical model (Vergnes et al., 1987) with two parameters: moisture content and mechanical energy. An increasing sensitivity to water content and mechanical treatment is observed as amylopectin content increases. This trend is in agreement with the most significant plasticizing action on highly branched macromolecules noticed by Lourdin, Della Valle, and Colonna (1995). However, amylose leads to higher values of viscosity and more pronounced shear thinning behavior, which may be related to the larger sensitivity of amylopectin to macromolecular degradation due to its higher molecular weight.
5.2.2 Mechanisms of gelatinization and melting Starch gelatinization is generally considered to occur in an excess of water (more than 100% added water on dry basis), whereas melting corresponds to the disappearance of native starch crystallinity at low hydration.
76
Starches: Characterization, Properties, and Applications
Starches present a melting process that is irreversible, kinetically controlled, and mediated by water plasticization. During the melting and gelatinization, successive endothermic transitions are observed according to water content and type of starch (Donovan, 1979; Biliaderis et al., 1986a; Russel, 1987). The first peak, identified as the gelatinization peak, observed above 66% (w/w), disappears progressively whereas further endotherms are progressively shifted toward higher temperatures as the water content decreases. In many starch-based foods, water content determines the type of preparation and food; in baked goods the water content is 50–60% (w/w), and in French cookies it is